Skip to content
Help Center

AI credits, costs and top-ups ​

Credits pay for some AI actions, such as new images in a Studio design. They also pay for part of the work that Commander runs on its own. This page explains them, and scheduled work has its own page. It states no credit amount and no price. The Billing page and the cost badge always show the current value.

Where to see your balance ​

  • Header pill. A coin icon and a number show your available credits. Select it to open Settings > Billing.
  • AI Credits card. On Settings > Billing, the card splits your credits into two pools.
PoolWhat it holds
Monthly creditsThe credits Commander gives you each cycle. A bar shows how many you have used this cycle and the date they reset.
Purchased creditsCredits you bought, and credits from coupons. Both kinds expire. While you hold coupon credits that can expire, the label reads Purchased and coupon credits.

Commander uses Monthly credits first. Then it uses your purchased and coupon credits, the ones that expire soonest first. Monthly credits that you do not use do not carry over after the reset date.

Under the pool, the card says when credits expire:

  • With coupon credits that can expire: Coupon credits expire on the dates shown. Purchased credits expire too, and their date shows here before they do.
  • Without them: Purchased credits expire. Their date shows here before they do.

When coupon credits can expire, the AI Credits card lists them under the pools. Each line reads (number) coupon credits expire on (date). With many batches, the list ends with and more.

When purchased credits expire ​

Credits you buy are valid for a period after the purchase. The Billing page shows the current values. Unused purchased credits are removed from your balance on their expiry date. Only the part you did not use expires.

Before that date, Commander warns you twice:

  • By email. The email reads Your purchased credits expire soon and lists each amount with its date. Its View billing button opens the Billing page.
  • On the Billing page. A notice shows under the AI Credits card. Its heading reads Purchased credits expire soon, or Purchased credits expire within a week when the date is close. Each line reads (number) purchased credits expire on (date). With many purchases, the list ends with and (number) more.

When purchased credits expire, Credit history lists the entry as Top-up credits expired.

In Demo Mode the notice shows sample credits, and no email is sent.

If your account has no credit balance yet, Commander hides the pill. The AI Credits card then says Credit metering isn't active for this account yet.

Unused monthly credits reminder ​

Late in your monthly cycle, Commander sends one email when you have used less than half of your Monthly credits. It reminds you that unused monthly credits do not carry over after the reset date.

  • Who gets it. The owners and admins of your organization each get the email.
  • When it goes out. Commander sends it on a weekday, during office hours, in the timezone of your store. It sends at most one per cycle.
  • How to stop it. Turn off Unused credits reminder in Settings > Profile > Notifications, or use the unsubscribe link in the email. See Profile and notifications.

In Demo Mode, Commander sends no email.

What costs credits ​

The What actions cost table on the Billing page shows the cost of each action that uses credits. It has three columns: What you get, Charged and Credits.

You pay only for actions you start, and only when they succeed. In Create, the actions that use credits include:

  • A new image in a Studio design.
  • An existing image in a new size.
  • An image edited with AI.
  • The words in an editable image rewritten with AI in the editor's AI Chat.
  • An image made editable, so you can change each layer.

Writing ad copy uses no credits. That covers the text suggestions in the Studio editor, a headline or primary text rewritten in its AI Chat, the copy that Commander writes for Performance Max and Demand Gen creatives and the copy in the Deployment Wizard, including its Regenerate.

Commander analyses the ads you sync on its own. No Analyze button on a Competitor Library card or an ad page starts a breakdown.

Sync Ads and Refresh Ads for competitors fetch ads for free. Commander then analyses the new ads on its own. That analysis uses credits from your scheduled work budget. Recompute Data on the JTBD tab does not use your credits when you start it, but limits apply. The next section covers the work that Commander runs on its own. On the batch screen, when your store's plan uses credits, the cost appears next to Generate creatives before you press it.

A second table lists volume limits that apply whatever your balance, such as the number of competitors you track. Select Need more? Contact sales to see the sales team's email address, with Copy and Open email.

Read the cost badge ​

A badge with a coin icon sits next to the button that spends credits, for example in the Studio editor. It shows the total before you press the button.

  • For repeated actions, the badge multiplies the price of one by the count.
  • A ~ before the number means an estimate.
  • up to before the number means the most the action can cost.
  • The badge turns red with a warning icon when you do not have enough credits.
  • Some screens label it Cost or Estimated cost.

In Demo Mode the badge adds demo and free. Nothing is charged.

Scheduled work ​

Work that Commander runs on its own also uses your credits, up to the budgets in the Scheduled work section of Settings > Billing. See Scheduled work uses credits.

Confirm credit usage ​

WARNING

Confirm and run starts the action and spends the credits.

Before a large spend, Commander opens the Confirm credit usage dialog. It opens when the cost is large in itself or large compared with your balance. The dialog shows:

  • This will use (number) credits for (action name). Commander adds approximately when the number is an estimate.
  • Your current balance and the balance after the action.
  • A Don't ask again checkbox.
  • Cancel and Confirm and run.

The dialog is a confirmation, not a block. Tick Don't ask again to skip it for that action. Commander remembers the choice in the browser you use. Another browser or device still asks.

When you cannot afford an action ​

Not enough credits. The cost badge turns red. Commander does not start the action and opens Buy credits. If your Commander account team manages your subscription, Commander tells you to contact that team instead.

A limit. Commander can also stop an action because of a limit on one action, or a limit on the spending of your store over a period. This can happen when your balance is enough. The message names the limit that applies. A limit of your plan opens the Plan limit reached dialog. See When a plan limit stops an action.

Low and empty balance ​

BannerWhen it shows
You're running low on AI creditsYour balance is getting small compared with your monthly credits. It shows the credits left. The AI Credits card shows a similar notice.
You're out of AI credits.Your balance is zero. Actions that use credits pause until you top up.

Both banners have a Top up link to the Billing page.

Buy more credits ​

WARNING

Buy credits makes a real charge.

  1. Open Settings > Billing.
  2. In the AI Credits card, select Buy More.
  3. In Buy credits, select a package. Each row shows its credits and its price.
  4. Select Buy credits. On some accounts the button reads Continue to checkout.
  5. If Shopify asks, approve the one-time charge on its page.

The dialog says how you are charged. Depending on your account, the charge goes on your Shopify bill, or Commander sends you to Shopify to approve a one-time charge. After you approve it, Commander shows (number) credits added. If Shopify is slow, you see Your purchase is still processing. Commander adds the credits within the hour, and you are not charged twice.

If you cancel on Shopify, Commander shows No charge was made. Your credit balance stays the same.

Buy More does not appear when your Commander account team manages your subscription, and it is disabled in Demo Mode.

Redeem a coupon ​

A coupon code can give you credits, extra days on your free trial, or both. You redeem a code on the Billing page.

  1. Open Settings > Billing.
  2. In Redeem a coupon, type your code in Coupon code. Spaces and capital letters do not matter.
  3. Select Redeem. The button reads Redeeming… while Commander applies the code.

Commander then shows a message that starts with the coupon name and applied. It adds what the coupon did:

  • (number) credits added. When the credits expire, the message adds They expire on (date).
  • The new end of your trial, when the coupon extends it. The message reads Your trial now ends on (date), Your trial reopened and now ends on (date), or Your free trial started and ends on (date).

Coupon credits join the purchased credits on the AI Credits card. While some of them can still expire, that row reads Purchased and coupon credits, and the card lists each expiry date. Credit history lists them as Coupon credits. When unused coupon credits expire, Credit history lists the expiry as Coupon credits expired. Only the part you did not use expires.

A coupon extends your trial only while you are on a trial or have no plan. If a coupon has credits and your plan already covers the trial part, Commander adds the credits and leaves the trial as it is. If the coupon only extends the trial, Commander refuses it.

A code can work once, or a limited number of times. A coupon can also limit use to once for your organization. Commander counts a use when you press Redeem, even while the code is still being applied.

If Commander refuses the code ​

Commander shows the reason under the field. These are the messages you may see.

MessageWhat it meansWhat to do
Enter a coupon code.The field is empty.Type the code.
That code isn't valid. Check it and try again.Commander does not know this code.Check the spelling. Letters that look alike, such as O and 0, are different characters.
This code has already been used.The code reached its limit of uses.Ask the person who gave you the code for a new one.
Your organization has already used this coupon.Your organization used this coupon before.You cannot use it again.
This coupon can't be used yet.The coupon starts later.Try again on or after its start date.
This coupon has expired.The coupon is over.Ask for a current code.
This coupon is no longer available.The coupon is paused or withdrawn.Ask the person who gave you the code.
This coupon isn't available for this store.The coupon is for other stores.Use a code that is meant for this store.
Your current plan already covers this, so this coupon's trial extension doesn't apply.The coupon only extends the trial, and your plan already covers it.No action needed.
Too many attempts. Try again later.You tried too many times in a short period.Wait, then try again.
We're still applying this coupon. Try again in a few minutes — you won't be charged a second use.Commander has not finished adding the credits.Wait a few minutes, then select Redeem again. The coupon gives its credits once.
We couldn't apply this coupon right now. Try again in a few minutes.Commander could not add the credits. Nothing was used.Try again later.

The Redeem a coupon card does not appear when your Commander account team manages your subscription. In Demo Mode the field and Redeem are disabled.

Review your usage ​

Where your credits went lists the actions you used this cycle. Credit history lists each entry with its Date, Type, Status and Amount. A pending entry is a hold: Commander releases it, or reduces it to the final price, when the task ends.

Spent by appears under Where your credits went once an agent has used credits. It groups the credits by agent. Credits that no agent used show as Unassigned.

Commander is built by Omniconvert.