Skip to content
Help Center

Connect Google Ads ​

Connect Google Ads to bring your Google Ads data into Commander. The connection also supports ad deployment and audience sync. Find it at Settings > Integrations, on the Google Ads card.

Problem and intended user ​

The media buyer (the person who runs your paid ads) needs Commander to read and deploy to the right Google Ads account. A missing conversion goal can block Target ROAS bidding, a missing logo or business name can make a deployment fail, and a missing Merchant Center account limits Shopping campaigns. Connect it once in Settings > Integrations.

Current workflow ​

Without Commander, the media buyer works in Google Ads and Merchant Center, copies results into a spreadsheet to compare with store data, and re-enters logos and the business name for each campaign.

Prerequisites ​

To connect:

  • Google account: one with access to a Google Ads account. A manager (MCC) account also works.
  • Browser: allow pop-ups. The Google sign-in opens in one.

To use a feature after you connect:

  • Merchant Center: an account linked to the same customer, for Shopping campaigns.
  • Conversion action: at least one enabled action, for Target ROAS bidding.
  • Brand assets: a square logo and a business name, for Responsive Display, Demand Gen and Performance Max ads.
  • YouTube channel: one that your Google account owns, for Demand Gen video ads.

How Commander works ​

Commander reads Google Ads data from the customer you choose, and deploys ads and syncs audiences to it. Fixed rules do this work. AI does not take part.

You approve access in the Google pop-up. You then approve each choice in Commander with Confirm, Save or Use this channel. Each choice feeds one feature:

SettingWhat Commander uses it for
CustomerThe Google Ads account that Commander reads from and deploys to.
Merchant CenterShopping and retail Performance Max campaigns.
Conversion trackingThe conversion action you keep on file. Commander does not apply it to the campaigns it creates; they use your account's conversion goals.
Brand assetsLogos and a business name for Responsive Display, Demand Gen and Performance Max ads.
YouTube channelDemand Gen video ads.

To deploy ads, see Review and deploy ads. To send audiences, see Audiences.

Connect with Google sign-in ​

  1. Go to Settings > Integrations and click the Google Ads card.
  2. Under What is this connection for?, keep the groups you want ticked. See Choose the permission groups below.
  3. Click Connect Google Ads.
  4. Sign in and approve access in the pop-up window.

Commander refreshes access for you. The card shows Last verified with a date, not an expiry date.

INFO

Google Ads connects with Google sign-in only. The dialog has no Enter Token tab. Commander cannot sync your ads with a service-account key, so it does not accept one.

Choose the permission groups ​

Before you sign in, the dialog asks What is this connection for? It shows three groups, all ticked. Each group turns on one part of Commander and asks Google for the access that part needs.

GroupWhat it turns onAccess it asks for
Audience syncSync your audiences to Customer Match.Google Ads and Data Manager access.
Ad creation and deploymentPublish ads, and use conversion tracking and brand assets.Google Ads and YouTube access.
AnalysisSync ad performance.Google Ads access.

Ad creation and deployment includes Analysis. When you tick it, Analysis stays ticked and locked, with the note Included with ad creation and deployment. Commander needs ad performance to run ad rules, the launch monitor and budget rebalance.

Keep at least one group ticked. With none ticked, the dialog says Choose at least one permission group to connect and the title-bar button stays off.

On Google, ad creation and analysis use the same Google Ads access. When you untick Ad creation and deployment and keep Analysis, the dialog says so: unticking one only removes YouTube access, and Commander limits the rest itself.

Commander turns on only the groups whose access Google granted. On Google’s consent screen you can untick access. If you do, Commander connects the groups that still have all their access. If Google granted no group’s access, the dialog shows "Commander didn’t receive the permissions any feature needs. Connect again and keep at least one group’s permissions".

A group you leave out stays off. A feature that needs it tells you the connection doesn’t include it. Without Ad creation and deployment, the dialog does not show the Merchant Center, Conversion tracking, Brand assets and YouTube channel rows, or the Budget pool panel. Without Audience sync, the dialog does not show Audience destinations, and Commander does not sync audiences to Google Ads.

A connection that you made before the groups existed has all three.

When you open a connected Google Ads card, the Permissions row lists the groups the connection has, with a Change permissions button. Reconnecting keeps the groups the connection already has.

Change permissions ​

To change the groups of a connected account, open the Google Ads card and click Change permissions. The dialog shows the three groups, with the ones the connection has ticked.

Until you change a tick, the dialog says No changes yet. After a change, If you save lists what it does. For each group you untick, a line says what stops, such as how many audiences stop updating on Google or how many active ad rules stop running. Ads already live keep running with their current budgets. A group you tick shows as Added:, and nothing changes until you accept on Google.

  • Remove a group. Untick it, then click Save permissions in the title bar. Commander stops using that permission for this shop. No Google sign-in is needed. Ad creation and deployment includes Analysis: unticking Ad creation and deployment leaves Analysis ticked, and you can untick it next.
  • Add a group. Tick it. The title-bar button reads Continue to Google. Click it, grant the new permission on Google's consent screen and confirm the customer. Nothing is added until you finish that sign-in. Your audiences stay as they are.
  • Keep at least one group. To remove them all, click Disconnect.
  • Change your mind. Cancel takes you back to the connection with nothing changed.

In Demo Mode, the dialog says Permission changes aren’t saved in demo mode.

INFO

Unticking a group does not remove the permission from your Google account. Google keeps listing the permissions you granted earlier, because it stores them on your Google login, and that login may also connect your other shops to Commander. To remove them there, open your Google account's third-party access settings and remove Commander. This removes the permissions for every shop connected with that login, and it disconnects all of them.

Choose a customer ​

After you sign in with Google, Commander asks you to choose a customer. The list shows only the accounts that the Google login you just signed in with can reach. It never shows the accounts of a login someone else made earlier. On Select Google Ads Customer, select an account and click Confirm. Nothing changes until you click Confirm: that replaces the stored Google sign-in and the customer in one step. Click Skip for now (Cancel reconnect when you are repairing a broken connection) or close the dialog to keep the connection as it was. The new sign-in is dropped. It also expires if you leave the step open. Test accounts carry a Test label. Manager (MCC) accounts do not appear in the list. Their client accounts do.

To change the customer later, open the Google Ads card and click Change account on the Customer row. Commander asks you to sign in with Google again, then shows the list for that login.

Send audiences to more than one Google Ads account ​

Audiences always sync to the main account, the customer you chose above. To also send them to other Google Ads accounts, for example one per market:

  1. Open the Google Ads card.
  2. In Audience destinations, tick each other account that you want. The list shows the accounts that your Google sign-in can reach, except manager (MCC) accounts and the main account. With more than 8 accounts, a search field lets you filter the list by name or ID.
  3. Each tick or untick saves straight away, and there is no Save button. The dialog shows Destinations saved. If a save fails, the box goes back to its earlier state and the dialog explains why.

You can tick up to 10 accounts. Once saved, every audience syncs to the main account and to each ticked account. Audience destinations shows only on a connection that has Audience sync.

Commander uploads a new account's members in full on its first sync. Open an audience in Performance > Audiences to see the Google Ads accounts list with each account's status. See Audiences. If Google cannot list your accounts, the dialog shows the reason and Try again.

If you untick an account, Commander stops syncing to it. It does not delete the audience that is already in that Google Ads account.

Choose a Merchant Center account ​

  1. On the Merchant Center row, click Select.
  2. Select your account and click Confirm.

Leave Advanced (feed label, sales country) blank unless your feed uses several country labels and you want a campaign limited to one.

If the step says No Merchant Center accounts are linked to this Google Ads customer yet, install the Google & YouTube channel app in Shopify. Link it to the same customer, approve the link, then click Refresh.

Set the conversion goal ​

The Conversion tracking panel appears after you choose a customer.

  • Under Conversion action for app campaigns, keep Account default (all conversion goals), or pick one conversion action. Click Save. Commander keeps your choice but does not apply it to the campaigns it creates. New campaigns optimize against your account's conversion goals.
  • With no enabled conversion action, Target ROAS bidding is blocked. Commander cannot create one. Create it in Google Ads under Goals > Conversions, or install the Google & YouTube app in Shopify. Then click Refresh.

Set brand assets ​

The Brand assets panel holds what Google needs for these ad types. Commander imports your logo from Shopify when you connect. You can replace it.

AssetRule
Square logo (1:1)Required. Without it, the panel warns No square (1:1) logo is set. and deployment of these ad types fails.
Landscape logo (4:1)Optional. It improves placement coverage.
Business nameRequired. Up to 25 characters. Click Edit to change it.

Logos must be PNG, JPEG, WebP or GIF files of 5 MB or less. The square logo must be at least 128x128 px, and the panel recommends 1200x1200 px. The landscape logo must be at least 512x128 px. A logo must have the 1:1 or 4:1 shape, or the upload is refused with a message. Use Upload, Replace or Remove.

If your business name differs from your Google Ads account name, a warning shows. A mismatch can lower click-through rate.

Commander links a channel when you allow YouTube access during sign-in. To change it, click Change or Select on the YouTube channel row, then click Use this channel next to a channel. Only channels that your Google account owns appear. Click Remove to unlink it. Commander uploads generated videos to it as unlisted.

Check or reconnect ​

Click Check connectivity to test the connection. Click Disconnect to remove it from Commander.

Disconnect acts at once and asks for no confirmation. It deletes the stored Google Ads sign-in and clears your Merchant Center account and YouTube channel choices. Your conversion goal and brand logos stay. It does not delete ads you already published. It does not remove Commander from your Google account. To remove it there, use Google's own settings.

WARNING

If you see Reconnect required for audience sync, click Disconnect, then connect again. This grants the permission that audience sync needs. Disconnect removes your customer, Merchant Center account and YouTube channel. Select them again after you reconnect. Your brand assets and conversion goal stay.

Commander encrypts your credentials before it stores them.

Reconnect when Google denies access ​

Google can deny Commander access to the selected account, for example when your access to it ends. The ad sync then stops. Commander shows this in two places:

  • Performance > Ad performance shows the card Google Ads needs to be reconnected. It says: "The ad sync stopped. Reconnect to import the missing days." If Meta Ads has the same problem, the title reads Meta Ads and Google Ads need to be reconnected.
  • On Settings > Integrations, the Google Ads card shows the ERROR badge. Open the card. The dialog shows Connection error with the message "Google Ads denies access to the selected account. Reconnect Google Ads to resume the ad sync".

How you reconnect depends on how you connected.

If you connected with OAuth

WARNING

An OAuth reconnect takes effect when you click Confirm on Select Google Ads Customer, not when you sign in. Select the customer there, or the sync cannot resume. If you click Cancel reconnect, the connection stays as it was. Your Merchant Center account and YouTube channel choices stay.

  1. Click Reconnect on the card. The accessible name is Reconnect Google Ads. The Google Ads dialog opens.
  2. Click Reconnect Google Ads.
  3. Sign in with a Google account that has access to the customer, and approve access.
  4. Select your customer again and click Confirm.

If your connection uses a Service Account

An older connection can use a service-account key. Its method badge reads Service Account. Commander cannot sync your ads with it. The card shows the ERROR badge, and the dialog shows Connection error with a red notice: "Commander can't sync your ads with a service-account key. Reconnect with Google sign-in to start the ad sync."

  1. Open the Google Ads card.
  2. Click Reconnect Google Ads. The Google sign-in pop-up opens.
  3. Sign in with a Google account that has access to the customer, and approve access.
  4. Select your customer again and click Confirm. The ad sync starts.

Disconnect still works if you prefer to remove the connection.

Commander imports the missing days on the next sync. Use Sync Now on Performance > Ad performance to start it sooner. If you restore access in Google without reconnecting, the next sync can clear the card by itself.

Set your ad budget ​

Commander needs an ad budget for each platform before it deploys ads. Once the Google Ads dialog shows Connected, it also shows Set up ad budget.

  1. Open the Google Ads card and click Set up ad budget.
  2. Enter the Monthly Budget. The dialog shows the daily amount under it.
  3. Select a Bid Strategy: Lowest Cost, Cost Cap, Target ROAS or Maximize Value. Cost Cap asks for a Target CPA. Target ROAS asks for a Target ROAS (×).
  4. Click Save.

The dialog then shows Ad Budget with the Monthly and Daily amounts, the Strategy and the number of campaigns. Click Edit to change them.

WARNING

Rebalance acts at once and asks for no confirmation. It splits the daily budget equally across your campaigns and updates the daily budget of campaigns already deployed on Google. It stays off until more than one campaign uses the budget.

Without a budget, the deploy dialog warns Set up a budget pool for Google Ads first before deploying ads. and links to Go to Integrations. To deploy, see Review and deploy ads. To create campaigns, see Campaigns.

Read-only access ​

Support can turn off write access to Google Ads for your store. This typically happens when the connected login can only view your account, such as a Google Ads Read only access level. Commander then reads your Google Ads account but changes nothing in it. To turn write access back on, contact support.

Disconnecting and connecting Google Ads again does not change this. Read-only stays on until support turns it off.

When write access is off, the Google Ads card on Settings > Integrations shows a READ-ONLY badge next to the connection status. Every control that would change something in your Google Ads account is greyed out. This includes Deploy and Retry Deploy on a generated ad, so you learn it before you fill in the deploy form. Hover over the control or focus it to read: "Write access to Google Ads is turned off for this store. Contact support to turn it on."

If you click or tap a greyed-out control, the same message shows in a notice at the bottom of the page. In an ad's detail panel, it shows under the panel's buttons instead. The notice also shows if a page you opened before the change tries to change Google Ads: Commander refuses the change and greys out the page's controls. The notice stays until you close it.

These actions are off for Google Ads:

  • Deploy ads, one at a time or in bulk.
  • Archive ads and campaigns, and pause or resume campaigns.
  • Send a budget change, and Rebalance a budget pool.
  • Sync an audience to Google Ads.
  • Let Commander set this up, Grant permission again and Also add the backup tag, which let Commander set up ad tracking in Google Ads.
  • Approve a decision that changes your Google Ads account.
  • Ticking Disabled to turn on an Auto Rule that targets only Google Ads. A new Auto Rule that targets only Google Ads is created turned off. When every ad platform you connected is read-only, the Auto Rules modes Require human approval for all and Auto-approve where allowed are off too.
  • Select Pause, Resume or Activate on an ad.
  • Select Kill on an ad in Launch Monitor. Kill pauses or archives the ad.

These actions still work:

  • Reading and reporting: sync and performance pages.
  • Viewing Launch Monitor.
  • Creating and editing ad drafts.
  • Preparing campaigns in Commander.
  • Changing your budget pool settings.
  • Creating rules.
  • Renaming or deleting an audience. This changes only the Commander copy. The copy in Google Ads stays as it is.

Auto Rules and automatic lifecycle actions skip Google Ads. Commander changes nothing in your Google Ads account.

Exact output ​

The customer list ​

The Select Google Ads Customer step lists the accounts that the Google login you just signed in with can reach. Without a sign-in made in the dialog, it shows a Sign in with Google button instead of a list. If Google still asks you to sign in, for example for a passkey, the dialog tells you to finish signing in with Google in the window that opened. Commander continues when you're done.

The connected dialog ​

The dialog shows the status (Connected, Connection expired, Connection error or Status unknown) and the method, with a date next to Verified. The Permissions row lists the groups the connection has, with a Change permissions button. The method reads OAuth. An older connection made with a service-account key reads Service Account. Rows for Customer, Merchant Center and YouTube channel each show your choice with a Change or Select button. On the Customer row the buttons read Change account and Select account, and they start a Google sign-in. The Conversion tracking and Brand assets panels sit below.

The card shows Last verified with a date, and YouTube: not connected until you link a channel. The date is not a sync time. When the status is Connected, the Ad Budget panel appears below.

Where Google Ads data appears ​

Commander updates Google Ads data on its own. Settings > Store Status shows the row Google ads sync with its last run. See Store Status.

  • Performance > Ad performance. See Ad performance.
  • Lifecycle. See Lifecycle.
  • Creative synthesis. It also opens with competitor ads. See Creative synthesis.
  • Campaigns. See Campaigns.
  • Launch Monitor. See Launch Monitor.
  • Audiences. Imported audiences need an ad account. Built audiences also open with your order history.
  • Create > Ads, where Deploy to Google sends an ad to your account.
  • The ad KPI cards on Home.

Before you connect an ad account, these views show Connect a platform to unlock this view with Connect an ad account. When the account is connected but holds nothing yet, they show Nothing here yet with Check your ad account connection. Campaigns and Imported audiences show their own empty state when the account is connected but empty. The Home ad KPI cards read No ad data for these dates.

What to do with it ​

What you seeDecision or actionOwner
Google Ads needs to be reconnected, or the ERROR badge on the card with the message "Google Ads denies access to the selected account. Reconnect Google Ads to resume the ad sync" in the dialogClick Reconnect, sign in, then select the customer again and click Confirm.media buyer
The ERROR badge on the card, and in the dialog the method badge Service Account with the red notice "Commander can't sync your ads with a service-account key. Reconnect with Google sign-in to start the ad sync."Click Reconnect Google Ads, sign in with Google, then select the customer again and click Confirm.media buyer
Reconnect required for audience syncClick Disconnect and connect again.media buyer
No enabled conversion actionCreate one in Google Ads, outside Commander, then click Refresh.media buyer
The Merchant Center list is emptyInstall the Google & YouTube channel app in Shopify, outside Commander. Link it to the same customer, then click Refresh.ecommerce manager (the person who runs the store)
No square logo, or a name warningClick Upload or Edit in Brand assets.media buyer
YouTube: not connectedClick Select on the YouTube channel row.media buyer
Set up ad budget on the card, or the deploy warning about a budgetClick Set up ad budget, enter a Monthly Budget and a Bid Strategy, then click Save. See Campaigns.media buyer
A READ-ONLY badge on the card, or a greyed-out control or a notice at the bottom of the page with the message "Write access to Google Ads is turned off for this store. Contact support to turn it on."Contact support to turn on write access. See Read-only access above.media buyer

Expected value and measurement ​

A complete connection can help you compare Google results with store data. A conversion goal, a square logo and a business name can help you avoid a blocked Target ROAS campaign or a failed deployment.

Check it in Settings > Integrations: the Google Ads card shows CONNECTED. Then open Performance > Ad performance, choose Google, and compare You spent with Google Ads for the same dates. For audience sync, read the Status column on Performance > Audiences. It reads Synced, Syncing…, Building…, Not synced or Sync failed.

You cannot isolate the effect of your conversion goal from budget or offer changes made at the same time.

Limitations and exceptions ​

  • A missing group. A connection without Ad creation and deployment does not publish ads or track conversions. Without Analysis, it does not sync ad performance. Without Audience sync, it does not sync audiences. A feature that needs the missing group tells you the connection doesn’t include it. Click Change permissions to add it.
  • Other accounts. Each ticked account gets the same audience as the main account. The automatic status refresh from Google covers the main account only, so another account's row changes at its next sync.
  • Google sign-in only. Google Ads connects with Google sign-in. Commander refuses a service-account key and stores nothing from it. The ad sync, audience sync, deployments and Auto Rules all need the Google sign-in connection.
  • Older service-account connection. The dialog shows Service Account and the red notice. Commander cannot sync your ads until you click Reconnect Google Ads and sign in.
  • No Google Ads accounts. The dialog says there is nothing to select. Click Disconnect in the dialog footer, then connect with an account that has one.
  • No YouTube channel. The banner No YouTube channels on this Google account says how to create one. Then click Retry.
  • Brand asset errors. A wrong logo file shows Logo must be PNG, JPEG, WebP, or GIF. or Logo must be 5 MB or smaller. An empty name shows Business name cannot be empty.
  • Denied access. When Google denies access to the selected account, the ad sync stops until you reconnect. Commander keeps the data it already imported. It imports the missing days on the next sync after you reconnect. See Reconnect when Google denies access above.
  • Unhealthy connection. When the status is not Connected, the dialog says to use Check connectivity, or to disconnect and reconnect. A failed save shows a red message.
  • Read-only access. When support turns off write access, Commander still reads your Google Ads data. It disables every control that changes your Google Ads account. See Read-only access above.
  • Demo Mode. Connecting and disconnecting are blocked, with a message such as Disable demo mode to connect real integrations. Choosing a customer or Merchant Center account is simulated. Saving a conversion goal or a YouTube channel does nothing in Google.

Commander is built by Omniconvert.