Review and publish Google ads with the Deployment Wizard
Step 4 of the Deployment Wizard for Google is Review and publish. It shows the ads Commander prepared, with their texts and checks, and sends them to your Google Ads account. You reach it from Destination. Step 5 shows what went out: see Follow the result of a Google publish. See Choose a Google ad format in the Deployment Wizard for step 2 and Set the Google campaign and ad group in the Deployment Wizard for step 3.
Problem and intended user
A media buyer (the person who runs your paid ads) has picked a format and a destination, and needs ads with the right texts, link and brand before any spend starts. The ecommerce manager (the person who runs the store) wants to know that nothing spends before the ads are checked.
Current workflow
The media buyer writes the headlines and descriptions for each ad in Google Ads, uploads the images and checks the status of each ad there.
Prerequisites
- Steps 1 to 3 done for Google. See Choose a Google ad format in the Deployment Wizard and Set the Google campaign and ad group in the Deployment Wizard.
- Google Ads connected, with write access. Without it, Publish waits.
- A square logo and a business name under Integrations, Google Ads, Brand assets. Publish waits for them.
- Credits. Making new aspect ratios uses credits. Writing ad copy uses none. Ads and Destination show what opening Review and publish uses, and Review and publish shows the credits used so far. The Billing page shows the current values.
How Commander works
Commander's AI makes the aspect ratios you ticked on Ads that a creative lacks, and writes the texts, when step 4 opens. Fixed rules, not AI, run the checks on each ad. Nothing goes to Google as an ad until you press Publish.
Review and publish Google ads
With Google picked, step 4 is Review and publish too. Its subtitle reads "Edit anything below. No ads go to Google until you publish." Commander prepares the ads when the step opens: it makes the aspect ratios you ticked on Ads that a creative lacks, and fills each text list. A size counts as held only when the stored picture really has that shape, within 1%. A picture of the wrong shape for its size, for example a square image kept as 4:5, counts as lacking it: step 2 counts it as new, with its credits, and Commander makes it again. A size that another version of the same creative already holds is copied at no cost, as step 2 showed. It keeps the texts your creatives already hold when they fit, never a shortened one, and writes the rest. Writing texts uses no credits. A row opens when its images and texts are ready, and a line says how many are ready. Going back, Change on the destination card and the earlier steps wait while Commander works.
The left column holds the destination card, the ads and a preview. The destination card reads, for example, "Destination: Google", then the campaign and the ad group. For Performance Max it names the campaign and a new asset group. A second line gives the type, Performance Max, Demand Gen or Display, with Built in Commander or Imported. Change goes back to Destination. The right column holds What will be created and How it goes out, which holds Publish. The Ads line in What will be created counts what goes out. It is called Ad when one ad goes out, and for Performance Max it is called Assets and names every part, for example "12 images, 5 headlines, 1 long headline, 5 descriptions, 6 sitelinks". For a Demand Gen image ad it reads, for example, "1 Demand Gen image ad with 8 images, 5 headlines and 5 descriptions". With one Display ad per creative it names the images only, for example "2 responsive display ads with 2 images each", and gives the total "in all" when the ads hold different numbers of images. With one Display ad from all creatives it names every part, for example "1 responsive display ad with 8 images, 5 headlines, 1 long headline and 5 descriptions", with zeros while the texts are still being written.
What you see for each format
| Format | What the step shows |
|---|---|
| Performance Max | One asset group that holds the images of all your creatives. The card is titled Asset group: and the name of the asset group, and says, for example, "12 of 20 images per asset group". Rows, in this order, for Images, Logo, Videos, Business name, Final URL, Headlines, Long headlines, Descriptions, Call to action and Sitelinks. The Images row works like the one of a Display ad from all creatives: it shows the number of images, for example "12 (up to 20)", a strip of small pictures, the sizes (Landscape 1.91:1, Square 1:1, Portrait 4:5 and Vertical 9:16), a badge and Edit, and Edit images groups the images by creative, each with Regenerate and Remove. Commander makes each missing size from its own creative, as step 2 counted, and the asset group holds exactly the images you keep. Remove is not offered on the last landscape or the last square image, because Google needs at least one of each. Logo and Business name are read-only: they come from the Google Ads integration, and Videos says "None added. Google may make a short video from your images." |
| Demand Gen Image | One ad that holds the images of all your creatives, drawn like a Performance Max asset group. It has an Images row and an Edit images window like Performance Max's. Remove is not offered on the last landscape or square image, because Google needs at least one of the two. Rows for the Logo, Business name, Final URL, Headlines, Descriptions and Call to action. Logo shows the one square logo the ad goes out with, the integration's or one you set for this ad with Edit, square only (see Logos and business name below). A Demand Gen image ad has no long headline. |
| Demand Gen Carousel | One carousel ad with its cards in the order of your creatives. The top of the card is drawn like a Demand Gen Image ad, as rows under Assets, in this order: Logo, Business name, Final URL, Cover headline, Cover description and Call to action. Each row has its state badge and an Edit that opens its window. Logo shows the one square logo the ad goes out with, the integration's or one you set for this ad (see Logos and business name below). Cover headline and Cover description open a window with the text, its counter and a free Regenerate. Call to action is the ad's, and its second line says who it reaches: Applies to every card, Applies to 8 of 10 cards; cards 3 and 7 have their own (it names up to three cards, then says "4 cards have their own"), or Every card has its own. Below the rows, each card has its images and a Card headline, and may have its own link and its own Card call to action, which starts on Same as the ad. A card left on Same as the ad takes the ad's call to action; changing the ad's never changes a card that has its own. A card can also be set to Automated, which sends no button label for that card and lets Google pick it, even when the ad has one. If the ad is set to Automated, a card that has its own call to action still shows it. |
| Responsive Display Ad, 1 ad per creative | One ad for each creative, with its landscape and square images. Rows, in this order, for the Logos, the Business name, the Final URL, then Headlines (2 to 5), one Long headline and Descriptions (up to 5), and the call to action beside its label. Commander keeps the texts your creative already holds when they fit and writes the rest. |
| Responsive Display Ad, 1 ad from all creatives | One ad with the landscape and square images of all your creatives and one set of texts. The card is titled Responsive display ad and says, for example, "8 of 15 images per ad". It has one Images row that shows the number of images, for example "8 (up to 15)", a strip of small pictures, the sizes, a badge and Edit. Edit opens Edit images: the images are grouped by creative, each with its Landscape 1.91:1 and Square 1:1 picture and a Remove link under it, and Done closes the window. Commander makes each missing size from its own creative, so the size is also saved on that creative, and the price of each size shows on its button. Regenerate makes a picture again, replaces it on the creative too and costs the same as making it. Remove is not offered on the last landscape or the last square image of the ad, because Google needs at least one of each, or while a picture is still being made. Below that come the same rows as for a Display ad per creative. |
For a Responsive Display Ad, a creative that is already a Google Display creative and still a draft is used as it is. Publishing makes a new version of it with the texts you reviewed, the way Meta ads do. Any other creative, such as one made only for Meta, gets its own Google copy first, at no cost.
Each image tile has the same controls as on Meta: Regenerate on an image Commander made, Remove, Try again when Commander could not make a tile, and Add back. Regenerate shows its credit cost beside it, the same as a new aspect ratio, and makes that size again. It uses credits only if a new image arrives; if none does, the old image stays and the tile says so. A picture that came with your creative has no Regenerate. On a Demand Gen carousel, each card's image that Commander made has its own Regenerate, which makes that size again for that card only and leaves the other cards as they are. A new aspect ratio uses credits, at the cost step 2 showed. In Demo Mode Regenerate waits a moment and shows the same image again, and nothing is charged.
Edit the texts
Each text list is a row. It shows the label with the number of texts and the allowed range, the first text and how many more follow, a badge (Needs a fix, Worth a look or Ready) and Edit. Edit opens a window, for example Edit headlines, with one line for each text. Every line has a counter, for example 12 / 30. A problem with one line, such as an empty line, a text past its limit or an emoji, shows in a box right under that line. A problem with the whole list, such as too few texts, shows in a red box below Add headline. The line about what Google recommends sits in an amber box at the bottom of the window and changes as you add or remove texts. Every line has its own Regenerate and Remove: Regenerate writes one new text for that line alone, avoids the other lines and leaves them as they are, and uses no credits. While one line is being written, the other lines' Remove and Add wait. The Long headline of a Display ad changes in place with the same counter. The Cover headline and Cover description of a carousel are rows too: Edit opens a window with the text, the same counter and a free Regenerate.
Commander writes a text list again with Regenerate. Writing and rewriting texts use no credits. AI can be wrong, so read every text. Commander does not cut a text to fit. If a text is too long, it asks again for a shorter one. A text you type that is too long shows a red counter and holds that ad until you shorten it.
Logos and business name
A Responsive Display Ad shows the Logos and the Business name it goes out with, as rows. The Logos row shows the square logo and the landscape logo with their names, and one line that says where each comes from, such as Square logo from the Google Ads integration. A logo you set shows used only for this ad instead. An ad that goes out without a landscape logo says "No landscape logo (optional, reaches more placements)" on the row. A missing square logo is red and holds Publish. A missing landscape logo is optional: it never holds Publish, and the ad goes out without it.
Edit on the Logos row opens a window with two slots, Square logo (1:1, required) and Landscape logo (4:1, optional). Select Upload and choose a PNG, JPG, WebP or GIF file. Commander checks the shape and size of the file and shows the reason under the slot when it does not fit. A logo you upload sets this ad's logos only: the row then says Square logo used only for this ad (or the same for the landscape logo), and the Google Ads integration and your other ads keep their logos. Use the integration's logo appears next to a logo you set and goes back to the integration's. Go out without a landscape logo sends this ad without one. A square logo of its own also clears the red line for this ad when the integration has none. In Demo Mode the square logo is a sample: the first letter of the store's name. Demo Mode does not store uploads and shows a message instead.
A Demand Gen Image ad has a Logo row with one square logo and no landscape one, because Google takes only 1:1 logos on that ad. Edit opens a window with the Square logo slot alone (1:1 within 1%, at least 128×128 px; Google refuses a logo further off square on this ad, so Commander checks it before the upload). It works as on a Responsive Display Ad: Upload sets the logo for this ad only (the row then says used only for this ad), Use the integration's logo goes back, and a square logo of its own clears the red line for this ad when the integration has none. There is no Go out without a landscape logo there.
A Demand Gen Carousel ad works the same way: its Logo row holds one square logo, because Google's carousel takes a single logo that must be 1:1 within 1% (at least 128×128 px). Edit opens the same Square logo slot, an upload is for this ad only, and a square logo of its own clears the red line for this ad when the integration has none. The carousel never goes out with a landscape logo, so an ad whose brand has only a landscape logo is held until it has a square one.
The Business name row starts with the name from the Google Ads integration. Edit opens a window where you can give this ad a name of its own, up to 25 characters; a longer name shows a red counter and is not used. The row then says Only for this ad, and Use the integration's name goes back. The integration itself does not change. A Demand Gen ad has the same row, and a Performance Max asset group keeps the integration's name and shows it read-only, without Edit.
Call to action and Final URL
- Call to action, every ad appears next to the title of the Ads card when you publish 1 ad per creative with two or more ads. Picking a call to action there sets it on every ad, and each ad keeps its own Call to action to change afterwards. When the ads differ, it shows Mixed until you pick again. The list depends on the format. It includes Automated, which leaves the choice to Google. The other formats are one ad, so their call to action is the one on the ad itself. A carousel has one call to action for the whole ad. It starts from the creative's own call to action, never from a Meta ad's.
- Final URL is one field for each ad. On a Responsive Display Ad, a Performance Max asset group and a Demand Gen Image ad it is a row with the link and an Edit button; Edit opens a small window with the field, and a link that does not start with
https://or/shows its message there and on the row. An ad made from all your creatives starts from the product page when every creative shows the same product, else from your store's home page. If that product has no page in your store catalog, it starts from your store's home page too, once the catalog has loaded. A Responsive Display Ad made for each creative starts from that creative's landing page, then its product page, then your store's home page. It must start withhttps://or/. On Demand Gen and Display ads, Commander adds its tracking parameters to the link when you publish.
Sitelinks for Performance Max
A Sitelinks row shows the sitelinks of the campaign: links that Google can show below your ads, each with a link text, two description lines and a link. You do not change them on this step. For a new campaign you set them on step 3, in the Sitelinks section under Campaign settings, so the row shows that list. Select Back to change it there. See Set the Google campaign and ad group in the Deployment Wizard.
The row counts them, for example "6 (from the campaign)", and View opens them read-only, with no Edit. The View window says where to change them, above the list:
| Campaign | What the window says |
|---|---|
| A new campaign, or one you made in this run | "Set on step 3. Change them there." |
| A campaign built in Commander that you picked | "Change them in Campaigns", where Campaigns is a link that opens that campaign in a new tab, with its edit panel open. After you save there, Reload, on the line above it, shows the new logos and sitelinks on this step |
| An imported campaign | "This campaign was made in Google Ads. Change them there.", with Refresh from Google on the line above it. It reads the campaign’s business name, logos and sitelinks from Google again, and this step then shows what it holds now. Wait a minute between two presses: pressed sooner, it says "Google was read a moment ago. Try again in 41 seconds." (the number of seconds left). If Google cannot be read, it says "Could not read from Google" and keeps what it showed. Demo Mode has no button |
A campaign with no sitelinks has no window, so its row keeps that line under it.
Commander writes no sitelinks of its own and the ad sends none: the sitelinks that go to Google are the campaign’s. For a campaign Commander creates when you publish, the campaign’s list goes with it, and the Assets line of the summary counts it: that is a new campaign, one you made in this run, and a campaign built in Commander that you picked and that is not on Google yet. When none go out, the Assets line names no sitelinks. For a campaign you picked that is already on Google, Commander does not change its sitelinks, and the rail reads "Commander does not change your campaign's sitelinks." A campaign with none shows one muted line, "This campaign has no sitelinks. Google recommends 6.", with "None" under Sitelinks, and the row reads Worth a look. Its View window says where to change them, as for a campaign that has some, and lists "Sitelinks (0)". That line never holds the publish. Sitelinks are optional. While Commander reads the campaign’s sitelinks, the row says "Reading your campaign's sitelinks from Google." If it cannot, it says "Couldn't read your campaign's sitelinks from Google." and nothing else changes.
A campaign for which nobody has set sitelinks yet reads like any other: the block lists the sitelinks it has on Google, or the row says "This campaign has no sitelinks. Google recommends 6.". An ad you deploy to it sends no sitelinks of its own. To set them, select Edit on the campaign in Campaigns. For a campaign you made in this run, the row reads "None are set for this campaign, and none go out with this ad. Add them on step 3."
The step shows the campaign’s business name, logos and sitelinks once, in the rows and the preview, read-only. The Logos row has a View too, which opens the square and the landscape logo larger ("No landscape logo" when there is none); for the campaign’s own logos it says where to change them, as the Sitelinks window does. For a campaign made in Google Ads the row shows the first square logo and the first landscape logo, and its count is the number of logos the campaign holds, for example "5". View then shows all of them, grouped under Square logo and Landscape logo, with the line "This campaign was made in Google Ads. Change them there." After an update from Google, Commander keeps every logo of such a campaign; until then it shows the one square and the one landscape logo it stored before. To change them, open the campaign in Campaigns (a campaign built in Commander) or in Google Ads (a campaign made there). To read them again from Google, select Refresh from Google in the View window of the Logos, Business name or Sitelinks row of a campaign made in Google Ads. Commander reads a campaign’s business name, logos and sitelinks from Google when you first open the campaign in Commander, when you select Refresh from Google on step 3 (Destination), when you select Refresh from Google in a View window as above, and once a day in the nightly update of your Google data. A note in amber under the review, "Sitelinks from your earlier work are not on this campaign and will not be published until they are moved", means sitelinks from a publish you started earlier could not be moved to the campaign. Publish stays available, and those sitelinks are not published. Select Try again, or go back to step 3.
Brand
- Every format. Under Publishing as, the rail shows one row: the square logo and the name of your Google Ads account. The logo and the business name come from Integrations, Google Ads, Brand assets. Without a square logo or a business name, or with a business name longer than 25 characters, Publish waits and a red line under the row says what to fix, with a Change in the Google Ads integration link. When nothing is wrong, there is no line and no link. A missing landscape logo shows nothing here and does not hold Publish.
- Responsive Display Ad, Demand Gen Image and Demand Gen Carousel. You can set the logos (for Demand Gen, the square logo) and the business name for one ad with Edit on its Logos (Logo) and Business name rows (see Logos and business name below). The rail shows a logo of its own only when every ad in the review uses the same one. Otherwise it shows the integration's logo. A square logo set on the ad clears the red line for that ad, and the red line then names the ad's Logos (or Logo) row instead of the integration.
- Performance Max, a campaign built in Commander. The business name and logos are always the campaign’s: the ones set in Campaigns or on step 3, and for a part left as it is, the integration’s, which the campaign takes. The Logos and Business name rows, the preview and the rail show those. This includes a campaign that is not on Google yet. The View windows of the Logos and Business name rows say where to change them, the same line as in the Sitelinks window: "Change them in Campaigns", with a link that opens the campaign in a new tab, with its edit panel open, and Reload above it. Those are the ones the publish sends; a slot the campaign leaves to the integration shows the integration’s.
- Performance Max with its own brand. When you picked a Performance Max campaign that has its own brand settings turned on, the rail says that the campaign keeps its own business name and logos, and the integration’s brand does not hold Publish. The Logos and Business name rows then show the campaign’s own, with the line that says where to change them in their View windows, as in the Sitelinks one, and the rail names the campaign’s business; a campaign without a landscape logo shows "No landscape logo (optional, reaches more placements)".
Preview and checks
After the ads are ready, the Preview card shows them. With more than one ad, Preview of picks the ad. Show how Google may show these assets draws the assets together. Google assembles the final ad itself, so the preview is a guide.
Each ad shows Ready, Worth a look or Blocked. Checks on these ads groups what to fix under Fix before you publish, Worth a look and Heads-up. Select a line to jump to its field. The checks cover the number of texts in each list, the length of each text, emoji and symbols that Google refuses, the Final URL, the aspect ratios each format needs, and the number of cards in a carousel. They also cover the language. A Demand Gen ad group or a Display campaign that Commander built, and that already targets another language than your ads, shows a line such as "This ad group targets French; this ad is in English. Pick another ad group or a new one." and holds Publish. One with no language yet takes your ads' language when you publish. If your ads are in different languages, it shows "These ads are in different languages; one ad group can target only one. Publish them into separate ad groups." and holds Publish. An ad group or campaign you made in Google Ads keeps its own language. Google’s own advice shows as Worth a look and never holds Publish. It covers a short headline and a Portrait 4:5 image for Performance Max, and how many texts Google recommends, in a line such as "Add 2 more headlines to reach what Google recommends." The line sits on the row it concerns, and the edit window shows it too. Commander uses only counts that Google publishes, and for a Responsive Display Ad it asks for Google’s five slots: fewer than 5 headlines or fewer than 5 descriptions shows "Add 2 more headlines to reach what Google recommends." or the same for descriptions. The long headline is exactly one, so it has no such line. A Performance Max ad gets the amber line about a campaign with no sitelinks, described under Sitelinks for Performance Max. A Demand Gen ad asks for headlines of 30 characters or more and descriptions of 60 characters or more. A blocked ad stays out of the publish. Publish the N ready ads sends the others. A carousel and a Display ad from all creatives are one ad, so they have no such button. For a Display ad from all creatives the checks also say when a size is missing or when the ad holds more than 15 images, and they land on the Images row. A Performance Max asset group and a Demand Gen image ad say the same about their images (at most 20), and when a picture is still being made.
Publish paused or live
Under How it goes out, choose:
- Publish paused. Nothing spends until you switch it on, here or in Google Ads.
- Publish and go live after review. Spend starts once Google approves the ads.
The button names what it publishes, for example Publish 2 ads paused or Publish 1 carousel ad paused. Going live asks once more in Publish N ads and go live?. The dialog says Google reviews the ads first, then they start spending. Going live switches on what Commander made for this publish: a new campaign, the ad group or asset group, and the ads. A campaign or ad group you already had stays as it is.
WARNING
Publish creates the ads in your Google Ads account. A failed publish later does not remove the campaign and ad group that Continue made on Destination.
What Publish creates depends on the format:
| Format | What Publish creates |
|---|---|
| Performance Max, new campaign | The campaign from Destination, paused, with the brand, locations, language, and age and gender settings you chose. Then one asset group with all its images and texts, paused. |
| Performance Max, existing campaign | One asset group in the campaign you picked. The campaign itself is not changed. |
| Demand Gen and Display | The ads, paused, in the ad group from Destination. A carousel is one ad with all its cards. |
The ads go out one at a time, so one can fail while the others go out. A failed ad keeps its reason. Press Publish again to send the ads that did not go out.
Follow the result
Step 5 opens when you publish. It lists what went out, reads each status from Google and has Switch on, Retry and Save as setup. See Follow the result of a Google publish.
Exact output
You get ads in your Google Ads account. What Publish creates depends on the format, as the table under Publish paused or live shows. Step 4 shows the ads before they go out, with these parts: the destination card, the ads with their text rows and badges, the Preview, Checks on these ads, and the What will be created and How it goes out rail. After you publish, step 5 shows what was created. See Follow the result of a Google publish.
What to do with it
| What you see | Action | Owner |
|---|---|---|
| A finished publish | Follow it on step 5, switch the ads on and retry failed ones. See Follow the result of a Google publish. | media buyer |
| Blocked under Checks on these ads | Select the line to jump to its field and fix it. A blocked ad stays out of the publish. Publish the N ready ads sends the others. | media buyer |
| Worth a look | Read it. It never holds Publish. | media buyer |
| Publish waits for the brand | Select Change in the Google Ads integration and set the square logo or the business name. On a Responsive Display Ad, a Demand Gen Image ad or a Demand Gen Carousel ad you can also select Edit on the ad's Logos or Logo row and upload a square logo for that ad. | media buyer |
Expected value and measurement
The wizard replaces building each Google ad by hand, and its checks flag problems before ads reach Google. To check the ads, open Performance > Ad performance and read Spend and ROAS for them. You cannot isolate the effect of the wizard when other creative, budget or audience changes ran at the same time. See Ad performance.
Limitations and exceptions
- The wizard publishes Performance Max, Demand Gen and Responsive Display ads to Google. Google ads go out one at a time and Google must approve them before they run. Step 5 shows the result, switches the ads on and saves a named setup: see Follow the result of a Google publish.
- On Google, Performance Max makes one asset group and Demand Gen Image makes one ad, from all your creatives. You cannot add ads to an existing asset group: every publish makes a new one.
- AI writes the texts and makes the new aspect ratios. Read both before you publish.
- A failed publish later does not remove the campaign and ad group that Continue made on Destination.
When something fails
| Message | What to do |
|---|---|
| "Google access is read-only. Reconnect Google with write access in Settings > Integrations to publish." beside Publish on Review and publish | The ads you prepared stay on the page and Publish waits. Reconnect Google Ads with write access under Integrations, then carry on. |
| "Couldn't write the copy. Type it below or" with Try again | Select Try again, or type the texts yourself. |
| "This ad didn't go out" followed by a reason | That ad stays out and keeps its reason. Fix it, then press Publish again, or use Retry on step 5. The ads that went out stay. |
| "This campaign already has an asset group named" followed by a name | Rename the asset group on Destination, then publish again. |
| A card or image named in the message, for example "Card 1 ("Ride the Hydrogen"): Google refused its Portrait 4:5 image because it is not 4:5 (it is 1024×1024)." or "Asset group "Autumn": its Square 1:1 image is not 1:1 (it is 1200×900), so Google would refuse it. Nothing was sent." | Nothing goes out when Google refuses an image or a card, or when Commander finds an image that is not the shape of its size (within 1%) before it sends anything. The publish stops and names the ad, asset group or card, the size, the real size of the picture and the reason. It applies to every Google format: Performance Max, Demand Gen image and carousel, and Display. A Demand Gen carousel never goes out with fewer cards than you built, and a card with no image stops it too. Regenerate that image, or untick that size for it, then publish again. A square logo that Google refuses stops the publish the same way: replace it with Edit on the Logos row. A landscape logo is optional, so one that Google refuses does not stop the publish: the ad goes out without it and the ad shows the note "The landscape logo (4:1) could not be sent to Google, because " followed by the reason. To add a landscape logo to that ad, edit the ad in Google Ads. A throttle or a network failure is not told this way: Commander tries again by itself. |
| "Card 2: the Square 1:1 image was cropped from the Landscape picture." on the ad after it went out | A size the creative did not hold as its own picture was cut from another picture of the same creative when you published. The ad went out; look at that size, and use Regenerate on it next time if the crop is not what you want. |
| "These ads don't fit the campaign you picked. Go back to Destination and pick another." | Select Change on the destination card and pick another campaign. |
Demo Mode
The page shows a Sample data badge next to the heading. Demo Mode creates nothing on Google.
On Review and publish, Commander waits a few seconds, writes sample texts for the demo store's brand, and shows the new aspect ratios as the creative's square image. Nothing is read from your Google Ads integration: the rail shows the demo account's name with a letter in a tile, and no brand message holds Publish. Credits used shows "Not charged in Demo Mode". Publish ends at once, with each ad marked Published (demo), and nothing is created in Google Ads. Step 5 is described in Follow the result of a Google publish. Changing the brand assets under Integrations is switched off in Demo Mode: it answers "Disable demo mode to change brand assets."