Skip to content
Help Center

Ad Containers: see every ad set, ad group and asset group ​

Ad Containers lists the level between a campaign and its ads: Meta ad sets, Google ad groups and Google Performance Max asset groups. It shows containers you built in Commander and containers made in Meta Ads Manager or Google Ads, in every status. Open it from Performance > Ad Containers.

Meta ad sets, Google ad groups and Google asset groups that you built in Commander can be edited, paused, resumed and archived here. You can also create a Meta ad set or a Google ad group.

Problem and intended user ​

This page is for the media buyer (the person who runs your paid ads). An ad set holds the budget, the dates and the targeting of the ads in it. On Google, the budget and the dates belong to the campaign, and an ad group or an asset group holds the ads. When these containers sit in many campaigns on two platforms, it is hard to see which ones run, what they spend per day and which ads they hold. A paused or forgotten container can hold a budget or ads that you meant to stop.

Current workflow ​

You open Meta Ads Manager and switch to the ad sets level, then open Google Ads and switch to its ad groups or asset groups. In each tool you filter by campaign, status or name, and add columns for the budget and the schedule. To see which ads came from Commander, you compare the ad names with the ads you deployed.

Prerequisites ​

  • Connect Meta Ads, Google Ads or both, and let the account sync. See Meta Ads and Google Ads.
  • Have at least one ad set in your Meta ad account, or one ad group or asset group in your Google Ads account. Commander lists the containers the sync brings in.

How Commander works ​

Commander reads your synced Meta and Google Ads campaigns, ad sets, ad groups, asset groups and ads. Fixed rules, not AI, build the table. The page changes your ad account only when you create an ad container, or edit, pause, resume or archive one built in Commander.

The page depends on your ad sync. A new container, a new status or a new budget appears after the next sync. Google ad groups that Commander creates in the Deploy to campaign dialog appear as soon as they are created, before you deploy and before the sync. Asset groups that Commander creates when you deploy ads appear right after the deploy, before the sync.

Find an ad set ​

Use the controls above the table.

  • The platform buttons in the page header read All Platforms, Google, Meta and TikTok. All Platforms lists Meta and Google together. Google or Meta lists that platform only. TikTok is greyed out: point at it, or move to it with the keyboard, to see Coming soon.
  • Source shows All, Built in Commander or Imported. Built in Commander lists the ad sets you created from Commander, and the Google ad groups and asset groups Commander created, whichever campaign they are in. Imported lists the ones made in Meta Ads Manager or Google Ads, including an ad group you added in Google Ads to a campaign you built in Commander.
  • Search by name, ID or campaign… matches the container name, its ID on the platform and the campaign name.
  • Campaign is set to All campaigns at first. Choose a campaign to see only its containers. The arrow icon in the Ad Containers column of Campaigns opens this page with Campaign already set to that campaign. Type in Search campaigns… to find one. Campaigns are listed newest first, Meta and Google together, in the same order as the Campaign filter in Review and deploy ads. A campaign you built in Commander counts from when you created it, an imported one from when it first synced. Imported campaigns are marked Imported. Each campaign shows its number of ad containers. When the list holds campaigns from both platforms, each label ends with its platform, for example · Google.
  • Status is set to All statuses at first. Choose Active, Paused, Archived or Deleted to see one status. Google has no archived status, so Archived lists Meta ad sets only. Each status shows how many ad containers have it under your other filters: the platform, Source, Campaign, Type and search. All statuses shows the total under those filters. Picking a status does not change these numbers.
  • Type comes right after Status and is set to All types at first. Choose Ad set, Ad group or Asset group to see one type. Each type shows how many ad containers it has under your other filters, Status included. With the Google platform button, Type offers Ad group and Asset group only. With Meta, every row is an ad set, so Type does not show.
  • Clear filters appears next to the filters while one is set. Select it to remove them all.
  • Select the Name, Budget, Start, End or Ads column heading to sort by it. Select it again to reverse the order, and a third time to return to the default order: the newest ad container first, Meta and Google together. Google does not share when an ad group or asset group was created, so Commander uses the time you deployed it from Commander, or else the time it first synced. On a phone, use Sort by and the arrow next to it. The Sort by list has a Created option for that default order.

A long list splits into pages. Use the arrows under the table to move between them.

Create an ad container ​

Create an empty ad set in one of your Meta campaigns, or an empty ad group in one of your Google Display or Demand Gen campaigns, ready for ads you deploy into it later. You cannot create a Google Search ad group or an asset group here: create a Search ad group with New Ad Group in the Deploy to campaign dialog, before you deploy. Commander creates an asset group when you deploy a Performance Max ad.

  1. Select Create ad container at the top right. A panel titled Create ad container opens.
  2. Under Platform, choose Meta. For Google, see Create a Google ad group below. TikTok shows as Coming soon.
  3. Under Campaign, pick a campaign in the table, the same one the deploy dialog uses. It shows each campaign's objective, status and budget. All, Built in Commander and Imported, the Budget buttons and Search campaigns… narrow it, and a column heading sorts it. The picked campaign folds into a card: select Change campaign to pick another. Under it, a line says whether the campaign has a Campaign budget or an Ad set budget. When Meta does not allow a new ad set in that campaign, a red message says why.
  4. Fill in the form. It is the New Ad Set form of the deploy dialog: a name, the audience, at least one location, the placements, a Schedule, the Age and Gender, and a daily budget when the campaign has an Ad set budget. See Review and deploy ads for each field and its checks.
  5. Select Create ad container. The button stays in view at the bottom of the panel while the form scrolls.

If another budget change for your Commander Meta ad budget is still running, for example another create or a budget edit, Commander refuses and reads "Another budget change is in progress. Try again in a moment." Select Create ad container again after a moment.

Commander creates the ad set on Meta, paused, with no ads. A message confirms Ad container created, paused. The ad set appears in the table as Built in Commander. Deploy ads into it from Review and deploy ads, then select the play icon (Resume) in its row.

Create a Google ad group ​

  1. Select Create ad container, and under Platform choose Google.
  2. Under Campaign, pick a Display or Demand Gen campaign, built in Commander or imported. Commander first checks with Google, so the list shows your campaigns as Google has them; if that check does not land, a line under the table says "Couldn't check with Google. Showing what Commander last saw." Search and Performance Max campaigns are not listed, and a line under the table says why: a Search ad group is created in the Deploy to campaign dialog, where it gets its keywords, and an asset group when you deploy a Performance Max ad.
  3. Fill in the form: Ad container name, the audience, Age and Gender. A Demand Gen ad group also has Locations. It starts empty here: add the countries, regions or cities where its ads can show, or leave it empty to show the ads in all countries. In an imported Demand Gen campaign that sets the location for all its ad groups, Locations shows the campaign's locations, greyed out with a line that says why, and Commander sends no location for the ad group. A Display ad group takes its locations from the campaign. A Display or Demand Gen ad group takes an audience only through its list in Google Ads: in Browse all, an audience it cannot take is dimmed with a line such as "Can't be added to a Display ad group". If the form still holds one, a red message under Audience says so, and Create ad container stays off until you pick another audience or remove it.
  4. Select Create ad container.

Commander creates the ad group on Google, paused, with no ads. When the campaign already has an ad group with that name, a red message under Ad container name says so. When Google did not take a setting, for example the audience, the panel lists it: select Done to close it.

Edit an ad container ​

The pencil icon (Edit) shows only on ad containers Built in Commander that are ACTIVE or PAUSED: Meta ad sets, Google ad groups and Google asset groups. Select the name to open the same panel: the name is a link only for those containers, and plain text for the others. Change an imported one in Meta Ads Manager or Google Ads.

For a Meta ad set:

  1. Select the pencil icon (Edit) in the ad set's row, or its name. A panel titled Edit ad container opens and reads the ad set from Meta. At its top, the platform badge (the Meta logo and name) sits beside Open in Meta Ads Manager, which opens the ad set in Meta Ads Manager in a new tab, on the ad sets list, filtered to that ad set. Under it, a line names the campaign: In <campaign name> campaign. Changes apply on Meta when you save.
  2. Change what you need:
    • Ad container name.
    • Daily budget, when the ad set has its own daily budget. In a Built in Commander campaign, the line above the field shows your Commander Meta ad budget. A raise above what is unassigned shows in red, and Save changes stays off. A lower budget is not held against your Commander Meta ad budget. If Commander or Meta refuses a budget, a red message gives the reason. Commander measures a raise from the ad set's budget as it last synced from Meta. Opening this panel brings that budget up to date, so a budget changed in Meta Ads Manager counts as soon as you open the panel. When another budget change for your Commander Meta ad budget is still running, the save reads "Another budget change is in progress. Try again in a moment." A Campaign budget or a lifetime budget shows as text: change it on the campaign or in Meta Ads Manager.
    • The audience, the locations and the placements.
    • Start date, until that date has passed. After that, the start date stays. End date, or clear it to run with no end. A lifetime budget needs an end date.
    • Age and Gender. Keep at least one age range and one gender besides Unknown checked: with only Unknown left, the form says "Pick at least one age range besides Unknown." or "Pick at least one gender besides Unknown." under the boxes, and the button stays off until you check one more.
  3. Select Save changes. It stays off until you change something. If another change to the same ad set is still saving, for example from a second tab, the save reads "Another change to this ad set is still saving. Try again in a moment." Select Save changes again after a moment. Cancel and Save changes stay in view at the bottom of the panel while the form scrolls.

Commander sends only what you changed. Targeting that the panel does not show stays as set on Meta, and the panel names it, for example "Kept as set on Meta: Detailed targeting, Languages." A message confirms Ad container saved.

Edit a Google ad group or asset group ​

  1. Select the pencil icon (Edit) or the name. The Edit ad container panel reads the container from Google. At its top, the platform badge (the Google Ads logo and name) sits beside Open in Google Ads, which opens a new tab on the ad group's ads in Google Ads, or on the campaign's asset groups for an asset group. Google may ask you to pick the account first. A line under the campaign name says Read live from Google., or "Google could not be read; showing the last synced values."

  2. Change what you need. For an ad group:

    • Ad container name.
    • Locations, for a Demand Gen ad group only. When the campaign sets the locations for all its ad groups, the field is greyed out and a line says why. An edited list keeps at least one location.
    • The audience. When Google does not take an audience on this ad group, the field is greyed out and a line says why. A new audience the ad group cannot take, for example one without a list in Google Ads on a Search ad group, shows "This audience can't be added to a Search ad group. Pick another or remove it.", and Save changes stays off.
    • Age and Gender. Keep at least one of each checked, besides Unknown: with only Unknown left, the form says so under the boxes and Save changes stays off.

    For a Performance Max asset group, change its Ad container name and its audience signal, a hint that helps Google find buyers.

  3. Select Save changes. A change to the targeting shows a note that it can restart Google's learning period.

Commander sends only what you changed. When the campaign already uses the name, a red message under Ad container name says so. When Google did not take part of a save, the panel stays open and lists it: select Done to close it.

Pause, resume or archive an ad container ​

These buttons show only on ad containers Built in Commander that are ACTIVE or PAUSED: Meta ad sets, Google ad groups and Google asset groups. Change an imported one in Meta Ads Manager or Google Ads.

  • Select the pause icon (Pause) to stop an ACTIVE container on its platform. Its ads stop delivering.
  • Select the play icon (Resume) to start a PAUSED ad set again. It delivers only while its campaign is active too.

A Google asset group is one ad, so pausing or resuming it pauses or resumes its Commander ad in Review and deploy ads too. An asset group whose ad you deployed paused, and that never ran, does not resume here. The message says "This asset group's ad was deployed paused and has never run. Start it in Create > Ads with Activate, which switches on its campaign and asset group together." Open the ad in Create > Ads and select Activate.

WARNING

Archive cannot be undone. Meta keeps an archived ad set read-only, and you cannot resume it. Meta also archives every ad in it, so the ads Commander made for it move to archived in Review and deploy ads. On Google, Archive removes the ad group or asset group, and it shows as DELETED.

Commander does not archive an ad set while an ad is still deploying into it. The message says "An ad is still deploying into this ad set. Archive it once the deploy finishes." It also waits for an edit of the ad set that is still saving. Archive it again once that finishes.

The same happens when someone archives or deletes the ad set in Meta Ads Manager: Commander archives the Commander ads inside it when it next checks with Meta, which is when you open a Deploy dialog or Create ad container, or at the next ad sync.

On Google, archiving an ad group or asset group in Commander also moves the Commander ads inside it to archived. The same happens when someone removes the ad group, the asset group or its campaign in Google Ads, and when you archive the Google campaign in Commander: Commander archives the Commander ads inside when it next checks with Google, which is when you open a Deploy dialog, Create ad container or Refresh from Google, or at the next ad sync.

  1. Select the archive-box icon (Archive) in the ad set's row. A window titled Archive ad container opens.
  2. Select Archive to confirm, or Cancel to keep the ad set.

A short message confirms Ad container paused., Ad container resumed. or Ad container archived. The table shows the new status at once.

Open the ads of a container ​

For a Meta ad set or a Google ad group, the Ads column shows how many ads the platform reports in it, made in Commander or on the platform. A Google Performance Max asset group is one ad: Ads shows 1 when it has its ad, whether you built it in Commander or in Google Ads, and a dash (—) when it has none.

When Commander made ads for the container, an arrow icon shows next to the number. Select it to open Review and deploy ads in a new tab, with Ad Container set to that container. It lists the ads Commander made for it.

Exact output ​

The page shows your ad sets, ad groups and asset groups in a table.

ColumnWhat it shows
NameThe container name, in full. For a container Built in Commander that is ACTIVE or PAUSED, the name opens Edit ad container. Under it, Built in Commander or Imported, the container type and the ID on the platform. For a Google row, Built in Commander means Commander created that ad group or asset group, with New Ad Group or by deploying an ad into a new one, even inside a campaign you imported. It also shows for one you deployed from Commander that the sync has not brought in yet. An ad group you added in Google Ads shows Imported, even in a campaign you built in Commander.
StatusACTIVE, PAUSED, ARCHIVED or DELETED. For Meta, as Meta reports it. For Google, enabled shows as ACTIVE, paused as PAUSED and removed in Google Ads as DELETED. A Google ad group or asset group whose campaign was archived in Commander or removed in Google Ads also shows as DELETED, with no actions, because it can no longer run.
PlatformThe ad platform's icon.
TypeAd set (Meta), Ad group (Google) or Asset group (Google Performance Max).
CampaignThe campaign the container belongs to.
BudgetFor a Meta ad set, its own budget, with /day for a daily budget or lifetime for a lifetime budget. Campaign budget alone means the campaign holds the budget and Meta spreads it across its ad sets. For a Google row, the campaign's budget, with /day or lifetime and the words Campaign budget under it, because Google sets the budget on the campaign. A Google amount shows in its campaign's currency. When Commander does not know that currency, the amount shows with no currency sign. Sorting by Budget puts rows in the same currency together, then orders them by amount. Rows with no amount come last.
StartThe date the container starts. For a Meta ad set, in your Meta ad account's time zone, as Ads Manager shows it. For a Google row, the start date of its campaign.
EndThe date the container ends. For a Google row, the end date of its campaign. A dash means no end date.
AdsFor a Meta ad set or a Google ad group, the ads the platform reports in it, made in Commander or on the platform. For an asset group, 1 when it has its ad (built in Commander or in Google Ads), else a dash (—). An icon opens the ads Commander made for it, when there are any.
ActionsIcons for containers Built in Commander that are ACTIVE or PAUSED: a pencil (Edit), a pause icon (Pause) or a play icon (Resume), and an archive box (Archive). Empty for the others.

Under the table, a line shows which rows you see out of the total, for example 1–25 of 60, and the page number.

What to do with it ​

What you seeDecision or actionOwner
An ACTIVE ad set you meant to stopSelect the pause icon (Pause) when it is Built in Commander. Otherwise pause it in Meta Ads Manager.media buyer
A PAUSED ad set you no longer needSelect the archive-box icon (Archive) when it is Built in Commander.media buyer
A campaign that needs a new ad setSelect Create ad container, then deploy ads into the new ad set.media buyer
A high daily budget on an ad setCheck its results on Ad performance. Select the pencil icon (Edit) to change it when the ad set is Built in Commander, else change it in Meta Ads Manager.media buyer
A number in Ads with no iconCommander made none of these ads: they were made in Meta Ads Manager or Google Ads. Check them on Ad performance or in the platform.media buyer
0 in AdsThe ad set holds no ads. Deploy an ad into it from Review and deploy ads, or leave it.media buyer
Campaign budgetChange the budget on the campaign: in Meta Ads Manager or Google Ads for an imported campaign, or on Campaigns for one built in Commander.media buyer
A Google ad group or asset group you want to pause or changeSelect the pause icon (Pause) or the pencil icon (Edit) when it is Built in Commander. Otherwise change it in Google Ads.media buyer

Expected value and measurement ​

This page can help you find ad sets that still spend or still hold ads you meant to stop. It does not improve results by itself. The changes you make to the ad sets do.

To check a change, open Performance > Ad performance and choose By ad set / ad group. Pick two equal date ranges, one before the change and one after. Compare Spend and ROAS for the ad sets concerned.

You cannot isolate one change when you change budgets, creatives or offers at the same time.

Limitations and exceptions ​

  • Imported Google rows. You cannot edit, pause, resume or archive an imported Google ad group or asset group on this page. Use Google Ads.
  • Google Search ad groups and asset groups. Create ad container makes Google Display and Demand Gen ad groups only. Create a Search ad group with New Ad Group in the Deploy to campaign dialog, before you deploy. Commander creates an asset group when you deploy a Performance Max ad.
  • Google settings the panel does not show. The edit panel changes the name and the targeting it shows. Keywords, bids and the other Google settings stay as set in Google Ads.
  • TikTok. TikTok ad groups do not show. TikTok is greyed out and shows Coming soon.
  • Google budget and dates. A Google ad group or asset group has no budget or dates of its own. The row shows its campaign's budget and dates, so two containers of one campaign show the same figures.
  • Asset group ads. A Performance Max asset group is one ad, so Ads shows 1 or a dash (—), never 0 and never more than 1. The arrow icon shows only when Commander made ads for it.
  • Imported ad sets. You cannot edit, pause, resume or archive an imported ad set on this page. Use Meta Ads Manager.
  • Saved audiences. You can choose a saved audience only when you create an ad set, not when you edit one.
  • Archived and deleted ad sets. Meta cannot bring them back, so they have no buttons.
  • A failed change. If Meta or Google refuses, an error message names the container and gives the reason, for example a connection to reconnect in Integrations. The container keeps its status. If another change to the same container is still saving, try again after a moment.
  • Read-only ad platform. When support turns off write access to Meta for your store, Create ad container, Save changes and the pause, play and archive-box icons of Meta rows are greyed out with the reason. See Read-only access in Meta Ads. The same goes for Google rows, the Google Save changes and the Google ad group's Create ad container when write access to Google is off.
  • Sync delay. The table shows what the last ad sync brought in. A change you make in Ads Manager shows after the next sync, or, for an ad set built in Commander, as soon as you open its pencil icon (Edit): the panel reads the ad set from Meta and updates its row. If the ad set was archived or deleted in Ads Manager, the panel says it cannot be edited, and the row shows its new status. A Google ad group or asset group you deployed from Commander shows in the table right away, but a campaign's container count and its Campaign filter entry include it only after the sync brings it in. If the sync still has not brought it in after a while, or it belongs to a Google Ads account other than the connected one, the table stops listing it.
  • No ad containers yet. With nothing synced, the page reads No ad containers yet and "Ad containers show up here after your Meta or Google Ads account syncs, whether you made them in Commander, in Meta Ads Manager or in Google Ads." Connect Meta Ads or Google Ads, or wait for the first sync.
  • A long list. When an account holds more ad containers than the list can show at once, a note above the table reads "Only the first … of … ad containers are listed. Use search or the filters to narrow the list.", with the number of containers the pages reach and the number that match your filters. The page count covers only the containers listed. Narrow the list with search or the filters.
  • No match. When your filters match no ad set, the page reads No ad containers match these filters. Select Clear filters.
  • A failed load. If the list cannot load, the page reads Ad containers could not be loaded. Select Try again.
  • Demo Mode. The page shows sample Meta ad sets, Google ad groups and Google asset groups. For a Meta ad set, the pencil icon (Edit) shows the sample values. Create ad container, Save changes and the pause, play and archive-box icons show a message asking you to turn off Demo Mode, and change nothing, on Meta and Google rows alike.

Commander is built by Omniconvert.