Set the Google campaign and ad group in the Deployment Wizard
Step 3 of the Deployment Wizard for Google is Destination. It is titled Campaign and ad group for Demand Gen and Display, and Campaign and asset group for Performance Max. You reach it from Ads. See Choose a Google ad format in the Deployment Wizard for step 2 and Review and publish Google ads with the Deployment Wizard for steps 4 and 5.
Problem and intended user
A media buyer (the person who runs your paid ads) needs the ads in the right Google campaign and ad group or asset group. A campaign keeps its type, so a format that does not match the campaign cannot be added to it.
Current workflow
The media buyer builds the campaign and the ad group or asset group by hand in Google Ads, sets the budget and the audience there, then uploads the ads.
Prerequisites
- Steps 1 and 2 done for Google. See Deployment Wizard and Choose a Google ad format in the Deployment Wizard.
- Google Ads connected, to pick Google. Until it is connected, the Google card is switched off and says "Google Ads isn't connected." Go to Integrations fixes it the same way. See Google Ads.
- A square logo and a business name for Google, set under Integrations, Google Ads, Brand assets. Destination and Review and publish wait for them. A Demand Gen or Display ad can change both for its own ads on Review and publish.
- Your Commander Google ad budget, to create a new Google campaign. Without it, Destination shows "Set up your Commander Google ad budget in Integrations first." and holds Continue. A campaign you already have still takes the ads.
How Commander works
Fixed rules, not AI, decide which Google campaigns can take your ads. Nothing goes to Google as an ad until you press Publish in step 4. Before that, Continue creates a paused campaign and ad group on Google for Demand Gen and Display, and nothing on Google for Performance Max.
Choose the Google campaign and ad group
With Google picked, the Destination step is titled Campaign and ad group for Demand Gen and Display, and Campaign and asset group for Performance Max. Its subtitle reads "Where the Google ads go, and what they run with." It has four blocks: Start from, Campaign, Ad group (Asset group for Performance Max) and Account and identity. Every value stays editable.
The campaign type follows the format you picked on Ads, and you cannot change it on this step. Google never changes a campaign's type after it exists, so a Demand Gen format only ever uses Demand Gen campaigns.
WARNING
For Demand Gen and Display, Continue on a new campaign creates the campaign and an empty ad group on Google, paused. Going back, or changing an earlier step, does not remove them. They stay in your Google Ads account.
Start from. Recommended by Commander is selected when the step opens. It fills a new campaign and, for Demand Gen and Display, a new ad group with no audience. The card says what it makes, for example "A new Demand Gen campaign (Sales goal) with a new ad group, no audience and no location limit." For Performance Max it says "A new Performance Max campaign (Sales goal), no location limit; it and its asset group are created when you publish." The goal it names comes from the creatives you picked. Last used is the same card as on Meta. Until one of your Google publishes has ended with at least one ad out, it is switched off and reads "Nothing to reuse yet. After you publish from this wizard, its campaign and ad group settings appear here." (asset group settings for Performance Max.) After that it offers the campaign and ad group choice of your last Google publish: an existing campaign or ad group, or a new one with the name, budget, goal, strategy, locations and audience you set. Dates are not kept. A campaign's Google type never changes, so when your last publish was another type the card stays switched off and says "Your last Google publish was Demand Gen." (or Performance Max, or Display). If that campaign was deleted or archived on Google, the card is not offered and says "Your saved setups add to campaigns or ad groups that were deleted or archived on Google." Selecting the card checks it against your Google campaigns as they are now and tells you what it left out, for example "Left out of this setup: the campaign Spring sale. The rest of its settings are filled in." Once a reused setup is in use, changing its campaign (new or existing, or another campaign) or, for Demand Gen and Display, its ad group leaves neither card selected, because what you have is no longer that setup. Select the card again to bring its values back.
Campaign. Pick New campaign or Add to an existing campaign.
- Existing campaign. The list shows the campaigns of your format’s type that can take these ads: those marked Built in Commander and those marked Imported. Use Source and Status to filter, and Refresh from Google to read your campaigns again. It also reads again the business name, logos and sitelinks of your Performance Max campaigns, so step 4 shows what they hold in Google Ads now. The count reads, for example, "N campaigns can take these ads". When none fits, the list says "No campaign can take these ads. Create a new one instead." If Commander cannot read the list, it says "Couldn't load your Google campaigns. Try again in a moment." The campaign you pick shows its Type, Status and Budget.
- New campaign. Daily budget holds the Campaign budget and Commander ad budget remaining shows what is left of your Commander Google ad budget. Under Campaign settings, set the Campaign name (up to 60 characters: Google shows it with a short Commander prefix and id, so a longer name would be cut, and Continue waits until it fits), the Objective and the Strategy (Optimize or Experiment). The objective that matches your creatives shows (recommended), and the other objectives and the other strategy are switched off, because Google refuses a campaign whose goal differs from its ads. When your creatives carry different objectives or strategies, Continue waits and says why. Under Schedule, keep "Starts when the ads go on, runs until paused", or choose Custom dates and set a start and an End (optional). The campaign is created paused.
- Locations. Performance Max and Display set locations on the campaign, under Campaign settings, with Performance Max's ages, genders and Retail Performance Max. Demand Gen sets them on each ad group: "Demand Gen sets the location on each ad group." Leave the picker empty to show the ads in all countries. When every picked creative's brief that names a location names the same places, the picker starts with them and says "Pre-filled from the brief."; otherwise it starts empty. Performance Max also asks for the Age and Gender to include, as checkboxes, Age on one row and Gender below it, all ticked to start (Age runs 18–24 up to 65+, and Unknown is people Google can't place); the info mark on each label explains them, and the fold's summary line says "all ages and genders" or how many of each are ticked.
- Demand Gen budget. Google sets a minimum daily budget for a new Demand Gen campaign, in your account's currency. Commander asks Google for it when the step opens, and the hint under the Campaign budget field names it, for example "Google requires at least RON 24.00 a day for Demand Gen." Below it, the field turns red with "Google needs at least … a day for Demand Gen." and Continue waits until you raise the budget. Until Commander has Google's figure, or when it cannot read it, the hint reads "Google requires at least 5 USD a day, or the equivalent in your currency, for Demand Gen." and Continue does not wait on it. Performance Max and Display have no such minimum and show no hint.
- Retail Performance Max. A new Performance Max campaign offers a Retail Performance Max checkbox under Campaign settings, labelled "Enable Retail Performance Max (blends Merchant Center product listings into PMax placements)". The line under it explains when to use it: it is recommended when your campaign objective is conversion and you have an active product catalog, Performance Max still works without it, and it lets Google use your product feed as an additional placement surface. Without a linked Merchant Center account, the checkbox is switched off and the line below says "Link a Merchant Center account in the Google Ads integration." with a Go to Integrations link. The link opens the Integrations page in a new tab with the Google Ads panel already open; once you link Merchant Center there and return to the wizard, the checkbox is available without reloading.
- Brand and sitelinks (Performance Max). A new Performance Max campaign has a Brand and sitelinks section under Campaign settings, the same one Campaigns > New shows: the Business name, the Square logo, the Landscape logo and the sitelinks. It starts with the name and logos of your Google Ads integration and no sitelinks, and it stays closed while that is all it holds; its summary reads "Business name, logos and sitelinks", or how many sitelinks it holds. It opens by itself when you add a sitelink, choose a name or logo of your own, or when something is missing, for example an integration with no square logo. To use a logo of your own, select Upload under the logo, and select Use the integration’s logo to go back; the business name has a Use the integration’s name link for the same. Business names are 25 characters or fewer, and the square logo is required. Under Add sitelink, each sitelink has a Sitelink N text, two description lines and a Sitelink N link on your store. The note under the section reads "Shown with every ad of this campaign. Sitelinks are optional: Google recommends 6." Sitelinks are optional. A part that is not valid shows its message under the field and takes focus when you select Continue; the line next to the button reads "Fix the brand and sitelinks before you continue" until it is fixed. What you set here is saved with the campaign draft that Continue makes, and Commander publishes it with your ads. After you go back from step 4, the same section shows the name, logos and sitelinks of the campaign you made, and Continue sends only what you changed. Commander writes no sitelinks for you. Step 4 shows the campaign’s name, logos and sitelinks as read-only. See Review and publish Google ads with the Deployment Wizard.
Ad group (Demand Gen and Display). Pick Create a new ad group or Add to an existing ad group. A new campaign has no ad groups, so the step says "A new campaign has no ad groups yet, so Commander creates one." All the ads of one publish go into the one ad group you name here.
- New ad group. The Audience is optional and starts as "No audience (broad)". Select it to pick one of your Google audiences; it then shows the audience's name, type and size. An audience the ad group cannot take is dimmed in the list, with the reason "Can't be added to a Demand Gen ad group" or "Can't be added to a Display ad group". With no Google audience yet, a line says "No Google audiences yet." and links to Build your first audience. Demand Gen adds Locations here. Under Ad group settings, set the Ad group name and tick the age ranges and genders to include. In an existing campaign the default name is numbered past the campaign's ad groups ("#2"), and a name the campaign already has shows "This campaign already has an ad group named "…"." and holds Continue. The Ad group settings summary line says "all ages and genders" or how many are ticked, for example "3 of 7 age ranges, 2 of 3 genders".
- Existing ad group. Pick one from the list headed "Ad groups in" followed by the campaign's name. A paused ad group stays paused: "Paused. The ads won't run until you resume it in Google Ads." A campaign with none says "This campaign has no ad groups Commander can see." and you create a new one.
Asset group (Performance Max). This block creates nothing on Google at this step. It says "Your ads go into this asset group when you publish, with the texts, images and final URL you add in step 4." The block has the same layout as Meta's ad set: its name under the title with a pencil (Edit asset group name), and a switch that offers only Create a new asset group, because you cannot add ads to an existing asset group: every publish makes new ones. It holds one optional Audience, which Google uses as an audience signal. It works like the ad group's: "No audience (broad)" until you pick one, and Commander sends it with the asset group. While none is picked, an amber line under it says "Performance Max runs without an audience signal, but a signal such as a Customer Match list can help Google's learning start faster." It does not hold Continue. Under Asset group settings, Audience and the Asset group name (up to 128 characters) sit side by side, one above the other on a narrow screen. It reads "The asset group takes this name." When you add the ads to an existing Performance Max campaign, Commander reads the campaign's asset groups and numbers the default name past the ones it has, for example "Nx | Spring sale · asset group #2". Google refuses two asset groups of a campaign with one name. A name you type that the campaign already has (capital letters and the "Nx | " start aside) shows "This campaign already has an asset group named "…"." under the field and holds Continue. If Commander cannot read the campaign's asset groups, Continue does not wait and Commander numbers the name when it publishes.
Account and identity. Two columns, one above the other on a narrow screen. On the left is the brand your ads show as: in one row, the square logo, the landscape logo and the business name from Integrations, Google Ads, Brand assets, under "Business name on Google". When no business name is set there, your website name stands in and the line says so. When the square logo or the name is missing, Add square logo or Add business name opens that Google Ads window in a new tab. When everything is set, point at the row to show Change in the Google Ads integration, which opens the same window. On a phone, or any screen without hover, the link always shows on its own line under the row. Continue waits until a square logo and a business name are set. Under the row it says in red "Google ads need a 1:1 square logo. Add one in the Google Ads integration." or "Google ads need a business name. Add one in the Google Ads integration.", and while it checks it says "Checking your Google brand assets…". Add the logo or the name in the new tab and come back to the wizard: Continue unlocks without a reload. A landscape logo is not required: without one, Add landscape logo shows, with an amber line under the row: "Google ads can run without a 4:1 landscape logo, but they reach more placements with one." It does not hold Continue. If Commander cannot read your brand assets, Continue does not wait on them, and the publish check still looks for them. On the right are the Google Ads account with its currency and "Google Ads account" under it; Go to Integrations shows there only while the account is not connected or needs reconnecting.
What Continue does for Google
| Format | What Continue does |
|---|---|
| Demand Gen and Display, new campaign | Creates the campaign on Google, paused, then an empty ad group under it, paused. The bar reads "Creating on Google…" while it works. |
| Demand Gen and Display, existing campaign and new ad group | Creates only the ad group, paused. |
| Demand Gen and Display, existing campaign and existing ad group | Creates nothing. |
| Performance Max | Creates nothing on Google. It keeps your campaign settings in Commander, and the bar reads "Saving the campaign…". Commander creates the campaign and its asset groups, paused, when the ads are published. |
If Google refuses the campaign, nothing is created and the message appears next to the field it concerns. If the campaign is created and the ad group fails, the campaign stays picked, marked "Paused · created just now", and the next Continue creates only the ad group. After you go back, a line reads "You made campaign and its ad group ad group on Google earlier, paused. They stay paused in Google Ads unless you use them." Select Pick it again to use them. See When something fails for the messages.
Next, Review and publish Google ads with the Deployment Wizard covers step 4.
Exact output
Continue creates what the table under What Continue does for Google shows, and nothing else. No ad exists on Google yet. The destination step shows these parts:
- Start from: Recommended by Commander and Last used.
- Campaign: New campaign or Add to an existing campaign, with the type, the status and the budget of the one you pick.
- Ad group for Demand Gen and Display, or Asset group for Performance Max.
- Account and identity: the brand your ads show as, and the Google Ads account with its currency.
What to do with it
| What you see | Action | Owner |
|---|---|---|
| "No campaign can take these ads. Create a new one instead." | Pick New campaign. | media buyer |
| Add square logo or Add business name | Set it in the Google Ads window that opens in a new tab, then return to the wizard. Continue unlocks without a reload. | media buyer |
| The Retail Performance Max checkbox is switched off | Select Go to Integrations and link a Merchant Center account in the Google Ads integration. | media buyer |
| An objective that is switched off | Use the objective marked (recommended). Google refuses a campaign whose goal differs from its ads. | media buyer |
| A paused ad group that you picked | Resume it in Google Ads when you want the ads to run. | media buyer |
| A line that reads "You made campaign and its ad group ad group on Google earlier, paused." | Select Pick it again to use them, or leave them paused in Google Ads. | media buyer |
| "Google needs at least … a day for Demand Gen." under the Daily budget | Raise the Daily budget to at least that amount. Continue unlocks. | media buyer |
Expected value and measurement
The wizard replaces building the campaign and the ad group or asset group by hand. To check the ads once they run, open Performance > Campaigns. You cannot isolate the effect of the wizard when other creative, budget or audience changes ran at the same time. See Campaigns.
Limitations and exceptions
- The campaign type follows the format you picked on Ads, and you cannot change it on this step.
- Last used is kept for Google separately from Meta: a Google publish does not replace your last Meta setup, and the other way round. It offers the last Google publish only for the same Google type, and it is written when a Google publish ends with at least one ad out.
- You cannot add ads to an existing asset group: every publish makes new ones.
- You set the business name, logos and sitelinks of a Performance Max campaign on this step only while the campaign is new or one you made in this run and that is not on Google yet. For a campaign you already had, step 4 shows them read-only: change them in Campaigns for a campaign built in Commander, or in Google Ads for an imported one.
- Going back, or changing an earlier step, does not remove a campaign or ad group that Continue made. They stay in your Google Ads account.
When something fails
| Message | What to do |
|---|---|
| "Couldn't create it on Google. Try Continue again." | Select Continue again. If the campaign was already created, it stays paused in Google Ads and Continue creates only the ad group. |
| "Couldn't load your Google campaigns. Try again in a moment." | Wait a moment, then select Refresh from Google. You can also create a new campaign instead. |
| "The minimum daily budget for Demand Gen is …" followed by Google's figure | Google refused the budget at Continue, which happens when Commander could not read the minimum beforehand. Nothing was created. Raise the Daily budget, then select Continue again. |
| "Another campaign in your Google Ads account already has this name. Pick another name." | Change the Campaign name. |
| "Your Google Ads account has reached its campaign limit." | Nothing was created. Remove campaigns you no longer need in Google Ads, or add the ads to an existing campaign. |
| "Google Ads refused the change. Check access in Google Ads, or reconnect it in Integrations." | Check your access in Google Ads, or reconnect it under Go to Integrations. |
| "Google Ads is busy. Try again in a few minutes." | Wait, then select Continue again. |
| "Google ads need a 1:1 square logo. Add one in the Google Ads integration." or "Google ads need a business name. Add one in the Google Ads integration." | Continue waits. Select Add square logo or Add business name on Destination, set it in the Google Ads window that opens in a new tab, then return to the wizard. |
| A note in amber that reads "Sitelinks from your earlier work are not on this campaign and will not be published until they are moved", or one that counts sitelinks that do not fit because a campaign holds 20 at most | Sitelinks from a publish you started earlier could not be moved to the campaign. They are not published. Select Try again, or Add them to the list when the note offers it. If the campaign would hold more than 20, remove some sitelinks first. The same note shows on step 4. |
| "Google Ads isn't connected." or "Google Ads needs to be reconnected." | Continue waits. Select Go to Integrations to connect or reconnect Google Ads. |
Demo Mode
The page shows a Sample data badge next to the heading.
Demo Mode creates nothing on Google. On Destination, the new campaign and ad group (asset group for Performance Max) forms start open with a sample budget, no location and no sitelinks, and the budget says "A sample amount for the demo store." The Brand and sitelinks section shows the demo store’s sample name, and uploading a logo is switched off in Demo Mode ("Disable demo mode to upload a logo.") Last used stays switched off, because Demo Mode keeps no setups, and Continue only moves on.