Skip to content
Help Center

Deployment Wizard: choose creatives and an ad format ​

The Deployment Wizard turns creatives you kept in a creative batch, or images from your Library, into ads in your Meta ad account or your Google Ads account. It has five steps: Creatives, Ads, Destination, Review and publish and Result. Open it with Deploy creatives on Create > Creative batches, with Deploy creative or Deploy creatives in a batch's ⋯ menu, with Deploy N kept creatives on a batch screen, or from the Library: Deploy creative on an image card, or Deploy selected creatives after you select assets.

This article covers steps 1 and 2, Creatives and Ads. Each later step has its own article, listed under Related. On Meta the wizard offers Single image, Multi-aspect and Carousel. On Google it offers Performance Max, Demand Gen (Demand Gen Image or Demand Gen Carousel) and Responsive Display Ad.

Problem and intended user ​

A media buyer (the person who runs your paid ads) has finished creatives and needs them running as Meta or Google ads. Every ad needs the right aspect ratios, copy, campaign and ad set or ad group. A mistake here sends ads to the wrong place or leaves them blocked. The ecommerce manager (the person who runs the store) wants to know what went out and whether it is switched on.

Current workflow ​

The media buyer exports the finished creatives, resizes them for each placement, writes the ad copy and builds the campaign and ad set or ad group by hand in Meta Ads Manager or Google Ads. Then they upload each ad one by one and check its status there.

Prerequisites ​

  • Creatives: at least one creative kept in a creative batch, or an image in your Library. See Review and keep your creatives and Library.
  • Meta Ads connected, to pick Meta. Until it is connected, the Meta card on Ads is switched off and says "Meta isn't connected." Select Go to Integrations to fix it. See Meta Ads.
  • Google Ads connected, to pick Google. Until it is connected, the Google card is switched off and says "Google Ads isn't connected." Go to Integrations fixes it the same way. See Google Ads.
  • Credits. Making new aspect ratios uses credits. Writing ad copy uses none. Ads and Destination show what opening Review and publish uses, and Review and publish shows the credits used so far. The Billing page shows the current values.

How Commander works ​

Commander's AI makes the aspect ratios your creatives lack and writes the ad copy. Fixed rules, not AI, run the checks on each ad and decide which campaigns and ad sets can take your ads. Nothing goes to Meta or Google as an ad until you press Publish. Before that, Continue on Destination creates a new campaign and ad set on Meta, paused. For Google, Continue creates a paused campaign and ad group on Google for Demand Gen and Display, and nothing on Google for Performance Max.

Choose the creatives ​

  1. Open the wizard. Creatives you chose on the way in are already selected.
  2. Search, or open Filters to filter by product, list, source, batch, date added, aspect ratio and more. Select lets you tick several creatives.
  3. Select Continue with N creatives.

A Meta or Google logo on a creative shows that Commander has published an ad made from it to that platform, paused ads included. This counts the ads the wizard builds from it: a copy for the other platform, a carousel card, or one image of a Google ad. A Library image shows the logos of the creatives made from it. Hover over a logo to read Running on Meta or Running on Google. In List view the logos sit in the Running on column. Filters > Published narrows the list to Not published yet, On Meta or On Google.

Choose the ads ​

If you saved a setup before, a card offers Your saved setup. Select Use setup to fill the ad format, the aspect ratios, the destination and the call to action in one go. Choose another shows another saved setup, Undo takes a used setup back, and Start from scratch hides the card. The card appears right away; Commander checks the setup when you select Use setup. If its campaign or ad set was deleted or archived on Meta (or its campaign or ad group on Google), nothing is filled in, the card says that the setup can no longer be used and offers your next saved setup, or you pick the platform and format yourself. If its ad set cannot take these ads, Use setup is switched off and says why. To delete a saved setup, for example because its campaign no longer exists, select the trash icon beside its name under Choose another (on Ads or on Destination), then confirm with Remove setup. When the card says that a setup can no longer be used, Remove this setup next to that line deletes it. Removing a setup cannot be undone, and it does not change your campaigns or ads on Meta or Google. In Demo Mode, a removal deletes nothing and says so.

WARNING

When your store's plan uses credits, opening Review and publish uses them to make the new aspect ratios for Meta. Writing the ad copy uses no credits. The cost shows next to Continue on this step and on Destination. The Billing page shows the current values.

  1. Under Platform, pick Meta or Google. You publish to one platform at a time. For Google, carry on in Choose a Google ad format in the Deployment Wizard.
  2. Pick an Ad format. On Meta: Single image, Carousel or Multi-aspect. A carousel needs 2 to 10 creatives. On Google, see Choose a Google ad format in the Deployment Wizard.
  3. Pick the aspect ratios: Square 1:1, Portrait 4:5, Vertical 9:16 or Landscape 1.91:1. Single image takes one ratio and Multi-aspect takes several. A carousel uses Square 1:1. Under the ratios, a line says how many placements your ratios cannot reach: Single image and a carousel fit only some placements, and with Multi-aspect the line names the placements each missing ratio would add.
  4. Read the cost lines. A creative that lacks a ratio gets a new image, and the new images show their credits. The ad copy shows no cost. When your balance is lower than the total, Continue opens the dialog to buy credits.
  5. Select Continue.

Next, set the destination. For Meta, see Set the Meta campaign and ad set in the Deployment Wizard. For Google, see Set the Google campaign and ad group in the Deployment Wizard.

Exact output ​

By the end of step 2 you have, in Commander, a set of creatives, a platform, an ad format and its aspect ratios. Nothing is created on Meta or Google yet. The Ads step shows these parts:

  • Platform: Meta or Google.
  • Ad format: the Meta formats Single image, Carousel and Multi-aspect, or the Google formats.
  • Aspect ratios: Square 1:1, Portrait 4:5, Vertical 9:16 and Landscape 1.91:1.

What to do with it ​

What you seeActionOwner
Your saved setup card on AdsSelect Use setup to fill the ad format, the aspect ratios, the destination and the call to action. Select Undo to take it back.media buyer
The Meta card on Ads reads "Meta isn't connected."Select Go to Integrations and connect Meta Ads.media buyer
A line under the aspect ratios counts placements your ratios cannot reachPick Multi-aspect. Its line names the placements each missing ratio would add.media buyer
Cost lines on Ads show credits for new aspect ratiosCheck the cost before Continue. When your balance is lower than the total, Continue opens the dialog to buy credits.media buyer
Continue on AdsSet the destination: Set the Meta campaign and ad set in the Deployment Wizard for Meta, Set the Google campaign and ad group in the Deployment Wizard for Google.media buyer

Expected value and measurement ​

The wizard replaces setting up each ad's format by hand, and the placement lines on Ads show what your ratios reach before you publish. To check the ads once they run, open Performance > Ad performance and read Spend and ROAS for them. You cannot isolate the effect of the wizard when other creative, budget or audience changes ran at the same time. See Ad performance.

Limitations and exceptions ​

  • A Meta carousel needs 2 to 10 creatives.
  • AI makes the new aspect ratios. Read them before you publish.

When something fails ​

MessageWhat to do
"Meta isn't connected." on the Meta cardSelect Go to Integrations and connect Meta Ads.
"Google Ads isn't connected." on the Google cardSelect Go to Integrations and connect Google Ads.

Demo Mode ​

The page shows a Sample data badge next to the heading. Demo Mode creates nothing on Meta or Google. Each later article says what its step shows in Demo Mode.

Commander is built by Omniconvert.