Review and publish Meta ads with the Deployment Wizard
Steps 4 and 5 of the Deployment Wizard for Meta are Review and publish and Result. Review and publish shows the ads Commander prepared, with their copy and checks, and sends them to your Meta ad account. Result shows what Commander created there. You reach step 4 from Destination. See Deployment Wizard for steps 1 and 2 and Set the Meta campaign and ad set in the Deployment Wizard for step 3.
Problem and intended user
A media buyer (the person who runs your paid ads) has picked creatives and a destination, and needs ads with the right copy before any spend starts. An ad that goes out unchecked can carry wrong text or start spending too early. The ecommerce manager (the person who runs the store) wants to know what went out and whether it is switched on.
Current workflow
The media buyer writes the copy for each ad in Meta Ads Manager, uploads the ads one by one and checks the status of each ad there.
Prerequisites
- Steps 1 to 3 done for Meta: creatives, ad format and aspect ratios, and a campaign and ad set. See Deployment Wizard and Set the Meta campaign and ad set in the Deployment Wizard.
- Meta Ads connected. Without it, Publish waits. See Meta Ads.
- Credits. Making new aspect ratios uses credits. Writing ad copy uses none. Review and publish shows the credits used so far. The Billing page shows the current values.
How Commander works
AI writes the copy for each ad when step 4 opens. Fixed rules, not AI, run the checks on each ad. Nothing goes to Meta as an ad until you press Publish.
Review and publish
With Meta picked, edit anything on this step. For each ad, change Primary text, Headline and Landing page. Call to action, every ad sets the call to action for all ads. Different call to action for this ad gives one ad its own, and picking the every-ad value there puts that ad back on the shared one. When the ads have different calls to action, Call to action, every ad shows Mixed until you pick one.
Each aspect ratio tile has Remove. Regenerate shows on a ratio the wizard made in this run, and a ratio the creative already had has none. Changing the creatives, the platform or the ad format starts the step over. The preview shows one placement at a time: pick a placement, or select Show all N placements to see them together.
AI writes the copy when this step opens, and a copy field can be written again with Regenerate. Writing ad copy uses no credits. AI can be wrong, so read it. Each ad shows Ready, Worth a look or Blocked, and Checks on these ads lists what to fix. A blocked ad stays out of the publish. Publish the N ready ads sends the others.
Under How it goes out, choose:
- Publish paused. Nothing spends until you switch it on, here or in Ads Manager.
- Publish and go live after review. Spend starts once Meta approves the ads.
Select Publish N ads paused or Publish N ads and go live. Going live asks once more in Publish N ads and go live?. When the ads go into a paused campaign or ad set that Commander built, the dialog offers to switch it on with the ads. Only that campaign or ad set goes on. Paused ads stay paused, and its other active ad sets and ads start delivering.
Follow the result
Step 5 opens when you publish. Commander makes the ads, then sends them at Meta's pace. A progress line shows the ads out and "about Ns left at Meta's pace". Closing or reloading the tab while ads are being made or sent asks first. Other pages in Commander do not ask, and the activity chip follows the publish to them. If you leave before the ads are made, the chip reads Publish paused with Open the wizard to continue, and the publish waits until you come back to the wizard.
Exact output
You get ads in your Meta ad account. The Result step is titled Publishing to Meta while it runs and Published to Meta when the ads are out. A partial publish reads, for example, "Published to Meta, 1 of 3 ads".
What Commander created is a table with the columns Object, Name, Meta ID, Status and Actions. Actions is left out when no row has a link or a fix. It has one row for the campaign, one for the ad set and one for each ad. Status is read from Meta, for example Active, Paused and Rejected. An ad's Status follows its own switch in Meta, so a switched-on ad reads Active while its campaign or ad set is paused. Check again, next to the table heading, reads the status of these objects from Meta again and shows when it last did.
- Ads Manager opens the object in Meta Ads Manager.
- Commander opens it in Commander: the campaign in Performance > Campaigns, the ad set in Performance > Ad Containers and the ad in Create > Ads.
- Fix and publish shows on an ad that was left out, with the reason. It opens Review and publish with that ad alone.
When the publish is done, Also publish to Google starts a new run with the same creatives and Google as the platform. Steps 2 to 4 start fresh. It is greyed, with the reason beside it, when Google Ads is not connected or your access is view-only.
Below the table, Switch on turns on paused ads, and the campaign or ad set when Commander built it. When the campaign goes on around an ad set that is already on, the confirm also says how many other active ads in the ad set start delivering too. If you pause the campaign or ad set in Ads Manager after Switch on, the card offers Switch on again with the note "Paused in Ads Manager after you switched it on." The line under the heading says what holds the spend, for example "The campaign is paused. Nothing spends until you switch it on." When the campaign and ad set were already running before the publish, it reads "The ads are paused. Nothing spends until you switch it on." The new ads spend nothing until you switch them on, and the campaign and ad set keep running. Switch on shows the budget the ads spend up to. For a campaign or ad set that already existed, it adds that the budget is shared with the ads already in it. Save as setup keeps the ad format, the campaign and ad set (or a new one's budget, countries, audience, age, gender and placements) and the call to action. It does not keep the copy. Publish log lists each action and folds once the publish is done.
What to do with it
| What you see | Action | Owner |
|---|---|---|
| Published to Meta with ads Paused | Select Switch on when you want them to run. Meta reviews them first. | media buyer |
| A paused campaign or ad set that Commander did not build | Switch it on in Ads Manager. Open the campaign and Open the ad set link there. | media buyer |
| An ad with Rejected or With issues | Open it with Ads Manager and read Meta's reason. | media buyer |
| Retry the failed ad, Retry the N failed ads, Retry the skipped ad, Retry the N skipped ads or Retry the N failed and skipped ads | Select it to send those ads again. Failed means Meta refused the ad or Commander could not make it. Skipped means it was not sent because the batch stopped. | media buyer |
| Left out with Fix and publish | Fix the ad on Review and publish, then publish it. | media buyer |
| Save as setup | Name the setup. A name another setup already uses is refused, and you pick another. Ads offers it first next time. | media buyer |
| The activity chip reads Publish paused with Open the wizard to continue | Select the chip to open the wizard. Commander makes the ads there, then sends them. | media buyer |
| Also publish to Google | Run the same creatives through the Google steps. See Follow the result of a Google publish for what that page shows. | media buyer |
| A finished publish | Select Start over to deploy more creatives. | media buyer |
Expected value and measurement
The wizard replaces building each ad by hand, and its checks flag problems before ads reach Meta. To check the ads, open Performance > Ad performance and read Spend and ROAS for them. You cannot isolate the effect of the wizard when other creative, budget or audience changes ran at the same time. See Ad performance.
Limitations and exceptions
- The wizard publishes single image, carousel and multi-aspect ads to Meta. For Google ads, start with Choose a Google ad format in the Deployment Wizard.
- AI writes the ad copy and makes the new aspect ratios. Read both before you publish.
- When Meta is busy, publishing and switching on take longer. Switch on says "When Meta is busy this can take up to a minute."
- Switch on does not work on an older publish. The message says "This publish is more than 7 days old. Switch the ads on in Ads Manager."
When something fails
| Message | What to do |
|---|---|
| "Nothing went to Meta" | The message under it says why. Select Back to review, change the ads or the campaign and ad set, then publish again. Your edits are kept. |
| "Nothing was switched on" | Meta stopped the batch and gave a reason. The paused campaign and ad set stay, and so do the ads that went out, paused. Select Back to review or Retry publish. |
| "Couldn't write the copy. Type it below or" with Try again | Select Try again, or type the texts yourself. |
| "This ad didn't go out" followed by a reason | That ad stays out and keeps its reason. Fix it, then press Publish again. The ads that went out stay. |
| An ad or card named in the message, for example "Ad "Spring sale": its Portrait 4:5 image is not 4:5 (it is 1024×1024), so it would not show as designed on Meta. Nothing was sent." or "Ad "Spring sale", card 2: it has no image" | Meta crops each image into its placements, but Commander stops the publish when an image is not the shape of its size (within 1%), and when a carousel card has no image, so the ad never goes out with fewer cards than you built. Nothing is sent. Regenerate that image, or untick that size for it, add the card's image or remove the card, then publish again. |
| "Meta isn't connected." or "Meta Ads needs to be reconnected." beside Publish on Review and publish (a read-only Meta account shows its own message) | The ads you prepared stay on the page and Publish waits, with the message in red. Nothing is made or sent meanwhile. Connect or reconnect Meta Ads under Integrations; once it is back, the step carries on without a reload. |
| "Couldn't switch them on. Nothing changed on Meta. Try again." | Select Switch on again. |
| "Couldn't check with Meta. Showing the answer from …" | The table keeps Meta's last answer. Select Check again in a moment. |
Demo Mode
The page shows a Sample data badge next to the heading. Demo Mode creates nothing on Meta. The Result step plays a sample publish, and the Meta IDs are stand-ins. Credits used shows "Not charged in Demo Mode". The Result step has no Check again, because Demo Mode reads nothing from Meta. Save as setup answers "Demo Mode keeps no setups."