Customize your KPI cards and targets
The Your KPIs band shows up to eight KPI cards on three pages: Insights > Overview for your store, and the Media buyer and Creative strategist tabs of Home. In this article, a dashboard is one of these three pages. Use Customize to choose the metrics, put them in order and set a target for each. A card with no target of yours shows a Default target that Commander calculates from your own store.
Problem and intended user
The ecommerce manager (the person who runs the store), the media buyer (the person who runs your paid ads) and the creative strategist (the person who plans and makes ad creatives) judge the business by different numbers. A fixed set of cards hides the ones they check first. Without a target, a number does not say if you are on track. A goal copied from another store does not say it either.
Current workflow
Most merchants keep key numbers in a spreadsheet. Each role pulls figures from Shopify admin reports, Meta Ads Manager, Google Ads or GA4 and types a monthly goal beside each one. When the date range changes, the merchant rescales the goal by hand.
Prerequisites
- Dashboard. Open Insights > Overview, or open Home and pick the Media buyer or Creative strategist tab. See Insights Overview and Home dashboards.
- Data. Store cards need your store history. Ad cards need a connected ad account. Google Analytics cards need Google Analytics 4 data. Conversion rate is one of them, and it is not in the default set.
How Commander works
Commander computes each card from your connected data with fixed formulas, without AI. It compares the value with the previous period and with your target. Insights > Overview, the Media buyer tab and the Creative strategist tab each keep their own card list. The store cards you set on Home before are the ones on Insights > Overview. The list belongs to you alone. A change does not touch the other two dashboards or your teammates. Commander saves your cards on its servers, so they follow you to any browser.
Open the wizard
- Open a dashboard: Insights > Overview, or Home > Media buyer or Home > Creative strategist.
- Find the Your KPIs band. Next to the Customize button, a line shows the date range, for example "Last 30 days, vs the previous 30 days".
- Click Customize.
The Customize KPI cards window opens. It has two steps: Choose metrics and Set targets. The Cancel, Back, Next and Save buttons sit in the title bar of the window.
Step 1: choose metrics
The window lists Your cards, in order. A counter reads "N of 8 selected". At eight, Commander adds "Remove one to add another" and disables the unchecked boxes.
- To add a card, tick a metric below. Each metric has a one-line description.
- To remove a card, click the X on its row.
- To change the order, use the up and down arrows on a row. Cards appear on the dashboard in this order.
- To start over, click Reset to defaults. Nothing is saved until you click Save.
- Click Next. To close the window and drop your changes, click Cancel.
Metrics sit in two lists:
- Recommended for you lists the metrics that suit this dashboard.
- Show all metrics (N more) opens the rest, grouped as Store, Ads and Creative. N is how many are left. Click Hide other metrics to close the list.
Recommendations only decide what you see first. You can pick any metric on any dashboard. A saved card whose metric has lost its data source shows Not available yet beside its name in the list, and Not available yet. on the dashboard. Remove it with the X.
WARNING
You need at least one card. If you click Next with none selected, Commander shows "Select at least one metric."
Step 2: set targets
The Set a target for each metric step lists your cards in the same order. Targets are optional.
- For each metric, tick the box that starts with Track a target for to set one. Clear the box to track none.
- Enter the number. A total, such as Revenue, takes a target per month. Commander scales it to the dates you pick, and a month counts as 30 days. When your dates are not a 30-day span, the target line shows the scale, for example "7/30 of $2,000/mo". A rate, such as ROAS, is compared as you enter it.
- Click Save in the title bar. Click Back to return to step 1.
Each target starts at a Commander default, shown in the field. The card labels it Default target until you save a target of your own. A card with no target still shows its value and its change, but not whether you are ahead or behind.
When Commander cannot calculate a default, the card shows Set a target and no number. Enter a target to see how you stand against it.
Commander checks each target when you save. A target must be a number. Currency and ratio targets must be above zero. Some metrics have a minimum or maximum. The message beside the field says what to enter.
How Commander calculates a default target
A default target is not one fixed number for every store. Commander calculates it from your own data, without AI.
- Commander measures how the metric moves in your store. With a long enough history, it compares your recent weeks with the same weeks last year and takes last year's matching month as the starting point. This keeps the season in the target. Without that history, it compares your latest weeks with the weeks before and starts from your level today.
- Commander asks for more growth when your store grows and asks you to recover when it declines. A store that is flat gets a modest step up. A store with a decline and no history from last year is asked to hold its level at least. With a year of history, a declining store is asked to get back to last year's level.
- A ceiling keeps each target realistic. A rate, such as CTR or ROAS, can grow less than a total, such as Revenue. A cost, such as CPM or CAC, is a number you want lower, so its default is below your level today.
- The cards agree with each other. The AOV target is the Revenue target divided by the Orders target. The Ad Spend target follows the Revenue target and the MER target.
- Commander calculates the defaults for a month and keeps them for the whole month, so your goal does not move while you work toward it. It calculates them again for the next month.
Commander uses all the order and ad data it has for your store, also the dates your plan lets you browse. A metric with too little data has no default. Its card shows Set a target.
A target you save always replaces the default. Commander never saves a default as if you had chosen it.
Change a target from a card or from Settings
You can change a target in two places.
- On a card. Click Edit target on the card.
- In Settings. Open Settings > KPI targets. The page lists the targets of your cards.
Both places change the same target. A target you save shows as Target, not Default target.
Compare two metrics
Most cards have a Compare button, an icon next to the information icon. Use it to plot the card's metric against a second metric, day by day.
- Find a card with the Compare button. Hover or focus the icon to see the Compare tooltip.
- Click it. A window opens with the title "Revenue vs Ad Spend", for example. The title follows your second choice.
- Under Compare with, pick the second metric. The list holds every metric that has a daily value, also those you did not add to this dashboard.
- To look at other dates, change Period in the window. Pick a preset from the list, or pick Custom range and enter a From date and a To date. The chart and the Daily values line change at once. Your second metric stays chosen.
- Read the chart. The first metric stays fixed. You cannot change it in this window.
- To close the window, click the X in the title bar. Focus returns to the Compare button.
The window opens with a second metric already chosen. Commander picks the first other card on your dashboard that has daily data. If no other card has daily data, Commander starts with the first metric in the list. The window opens on the dates of the date picker at the top of the page. Nothing in the window is saved, so it starts fresh each time.
The Period control belongs to the window. Changing it does not change the date picker on the dashboard, and the cards keep their dates. The list holds the same presets as the date picker, so a preset the date picker hides is not there. A custom range needs both dates, a From date on or before the To date, and a To date that is not in the future. If a pair is not valid, a red message appears next to the dates and the chart keeps the last valid period. If a range is longer than Commander can show, it uses the most recent days and tells you.
These cards have a Compare button when Commander has daily values for your dates: Revenue, Ad Spend, Orders, aMER, nCAC, MER, ROAS, AOV, CAC, CTR, CPM, CPC, Impressions and Conversions.
These cards never have one: Active customers, Retention Rate, Purchase frequency, CLV, POAS, NPS, # of subscribers, Conversion rate, Refund rate, Frequency and every creative metric, such as Hook rate and Hit rate. They have no true daily value that follows the date picker. Commander has one number for the whole range for Retention Rate, Purchase frequency and CLV. For Active customers, it has only the number of orders each day, not the number of customers.
INFO
None of the default Creative strategist cards has a Compare button. Add a store or ads card in Customize to use it on that dashboard.
Reset to the defaults
Click Reset to defaults in step 1, then Next and Save. If your list matches the dashboard defaults and you changed no target, Commander removes your custom layout. The dashboard then follows the defaults again.
Exact output
You get up to eight cards under Your KPIs, in your order, each with its own target line.
Read the compare chart
The line "Daily values" above the controls names the dates of the window's Period. Two lines share one date axis: a solid line for the card's metric and a dashed line for the second metric. The legend names both.
- Axes. Two metrics of the same kind, such as Revenue and Ad Spend, share the left axis. Metrics of a different kind put the second metric on the right axis.
- Gaps. When a metric has no value for a day, the line breaks. Commander does not draw a zero.
- Values. Hover a point to see the date and both values. Values use the same format and currency as the cards.
- Daily, not total. A rate shows that day's ratio, so the lines do not add up to the number on the card.
- Screen readers. A hidden table under the chart lists every day and both values. A day with no value reads No data.
Read a card
A card shows the metric name, an information icon with its definition, the value and the change against the previous period. The arrow points up or down with the change. A green badge marks an improvement and an amber badge a decline. A grey badge means no change, or a metric with no good or bad direction, such as Ad Spend. The Target or Default target line shows the gap. An Edit target link on the card changes the target. For a total metric over dates that are not a 30-day span, the line also shows how Commander scaled your monthly target. A rate keeps the number as you entered it.
Some cards carry a period label, such as All time, As of today or 7 days to a date. Through a date on an ad card means the ad data stops before the end of your range. A Partial label on nCAC means the number leaves out some spend. A line under the nCAC value, such as "284 of 485 new customers matched to an ad (188 of 413 before)", shows how many of your new customers Commander matched to an ad. When that share moves by more than 5 points between the two periods, the change badge turns grey. The change then mixes the cost of a customer with how many customers Commander matched, so it does not read as better or worse.
What to do with it
| What you see | Decision or action | Owner |
|---|---|---|
| An amber badge on a store card such as Revenue or Orders | Look for the cause in the store data | ecommerce manager |
| An amber badge on an ad card such as ROAS or nCAC | Review the campaign in Meta Ads Manager or Google Ads and change budget or targeting there | media buyer |
| An amber badge on a creative card such as Hook rate or Hit rate | Decide which creative to brief, test or retire | creative strategist |
| A card labelled Default target | Check if the default fits your goal. If not, click Edit target and enter your own | ecommerce manager, media buyer or creative strategist, by dashboard |
| A card whose line moves against another in the Compare window | Decide whether the two metrics move together, then look at the cause in the store or in the ad account | ecommerce manager or media buyer, by dashboard |
| A card that shows Set a target | Click Edit target and enter a target, or leave the card without one | ecommerce manager, media buyer or creative strategist, by dashboard |
| A card you never use | Click Customize and remove it with the X | ecommerce manager, media buyer or creative strategist, by dashboard |
Expected value and measurement
Your own cards and targets can help you see your key numbers first and read each against a goal. They do not change the numbers. Your actions do.
To check a target, open the dashboard that holds the card, such as Home > Media buyer. Read the value for your range against the Target line and the previous period. A Default target comes from your own data, so a gap to it shows how you move against your own trend. To check an ad figure against its source, open Performance > Ad performance for the same dates. If prices, promotions or ad changes ran in the same period, a gap to target does not show which one caused it.
Limitations and exceptions
- Default targets are Commander defaults. They come from your own history and may not match your goals. Replace them with Edit target or in Settings > KPI targets.
- A new store has fewer defaults. A metric needs enough data before Commander calculates a default for it. Until then the card shows Set a target.
- A default stays for the month. A change in your numbers during the month does not change the default until the next month.
- Compare uses daily values. A card with no daily values for your dates shows no Compare button. On a day with no orders, Revenue and Orders count 0 in the chart. AOV has no value on that day, so its line has a gap.
- Compare starts from the date picker, then has its own dates. The window opens on the dates of the date picker. A change to Period in the window stays in the window. A one-day range gives too few days to plot.
- Ad metrics cover a shorter range. For a period longer than the ad data covers, an ad metric has no daily data in the window. Pick a shorter period.
- Definitions. The information icon on a card shows its definition. The Glossary lists each term.
When a card is empty
| Message | What it means |
|---|---|
| A card says your store history is not imported yet. | Commander has no store history for your store yet. Store cards need it. |
| No store data for these dates yet. | Commander has no orders for the range. |
| No Google Analytics data for these dates. | The card needs Google Analytics 4 data. |
| No ad data for these dates. | The card needs a connected ad account. The aMER card also says this until after your store's order history has finished importing. |
| Ad metrics cover up to 90 days. Pick a shorter range. | Shorten the date range. |
| No ads launched in these dates. | No ad of yours launched in the range. |
| Not enough winners yet. | Commander has too few winning ads to compute the number. |
| Not enough converting ads (68 of 204). | Most ads that delivered earned no revenue, so Hit rate has no bar to rate against. The two numbers are converting ads and ads that delivered. |
| No ad launched 7 or more days before these dates end. | Hit rate counts only ads launched at least 7 days before the end of the range. Pick a longer range or wait. |
| Set a target | Commander has too little data to calculate a default for this metric. Click Edit target to enter your own. |
| Not available yet. | A saved metric has no data source yet. Remove the card with the X in Customize. |
| An Upgrade required badge above the card's message | Your plan does not include that metric. The Billing page shows the plans. |
| Couldn’t load this. Reload the page to try again. | The card failed to load. Reload the page. |
| Loading <Metric>… | The Compare window is loading that metric for the Period. |
| Couldn’t load <Metric>. Pick another period, or reload the page to try again. | The metric you opened the Compare window from failed to load. Pick another Period, or reload the page. |
| Enter a start date and an end date. | A Custom range needs both dates. |
| The start date must be on or before the end date. | Pick a From date that is not after the To date. |
| The end date can’t be in the future. | Pick a To date of today or earlier. |
| Couldn’t load <Metric>. Pick another metric, or reload the page to try again. | The second metric failed to load. Pick another metric under Compare with, or reload the page. |
| <Metric> has no daily data for these dates. Pick another metric or change the dates. | The second metric has no daily value in the range. Pick another metric or change the dates. |
| <Metric> has no daily data for these dates. Pick another period. | The metric you opened the Compare window from has fewer than two daily values in the Period. Change the Period. |
| <Metric> and <Metric> have no days in common in these dates. | The two metrics have no day with a value for both. Change the dates or pick another metric. |
When a save fails
If your browser blocks storage, a banner in the window says "This browser can’t save preferences. Your changes apply for this session only."
If a save fails, the cards go back to how they were. Commander shows "Couldn’t save your KPI cards, so they’re back to how they were. Try again." beside the cards. Open Customize and save again.
Demo Mode
In Demo Mode, Commander does not save your cards on its servers, so they do not follow you to another browser. The Compare window works on sample numbers, with sample days spread over the Period of the window.